PROFIBUS DP repeater expansion module for the PROFIBUS DP/PA coupler system
FB-DP-RPTR
-
Repeater
2316373
Product details
| Note on application | |
| Note on application | Only for industrial use |
| Product type | Device coupler |
| Supply | |
| Supply voltage range | Supplied via backplane |
| Typical current consumption | ± 160 mA |
| Max. current consumption | 270 mA |
| Supply | |
| Connection method | Bus base module |
| Conductor cross section, flexible | 0.20 mm² ... 2.50 mm² |
| Conductor cross section, rigid | 0.20 mm² ... 2.50 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Data: PROFIBUS DP | |
| Transmission speed | 12 Mbps (100 m cable length) |
| 1.5 Mbps (200 m cable length) | |
| 500 kbps (400 m cable length) | |
| 187.5 kbps (1000 m cable length) | |
| Transmission speed range | 9.6 kbps ... 93.75 kbps (1200 m cable length) |
| Termination resistor | 390 Ω - 220 Ω - 390 Ω (switchable) |
| Dimensional drawing |
|
| Width | 25 mm |
| Height | 100 mm |
| Depth | 132 mm |
| Color | green |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -20 °C ... 60 °C |
| Ambient temperature (storage/transport) | -20 °C ... 60 °C |
| Altitude | 2000 m |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Conformity/Approvals | |
| UL, USA / Canada | UL 508 Listed |
| UL, Canada | CSA C22.2 No. 142 |
| Standards/regulations | |
| Standards/regulations | Ring wave noise immunity in acc. with IEC 61000-4-12 |
| Standards/regulations | |
| Standards/regulations | Dry heat in acc. with IEC 61131-2 |
| Standards/regulations | |
| Standards/regulations | Damp heat in acc. with IEC 61131-2 |
| Standards/regulations | |
| Standards/regulations | Shock and vibration in acc. with EN 61131-2 and EN 50178 |
| PROFIBUS standardization | |
| Standards/regulations | IEC 61158-2 |
| Mounting type | DIN rail: 35 mm |
| Mounting position | on horizontal DIN rail NS 35 in acc. with EN 60715 |
Your advantages
No bus addressing of device required
Automatic detection of baud rate up to 12 Mbps
Integrated switchable terminator
Supported protocols: DP-V0, V1, V2, FDL, MPI, FMS and Profisafe