Sensor/actuator flush-type plug, 5-pos., B-coded, with straight THR solder connection, only contact insert
Product details
Notes on operation
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Product type
Contact insert
Number of positions
5
Coding
B
Thread type
M12
Insulation characteristics
Overvoltage category
III
Degree of pollution
3
Rated surge voltage
1.5 kV
Contact resistance
≤ 3 mΩ
Insulation resistance
≥ 100 MΩ
Nominal voltage UN
60 V
Nominal current IN
4 A
Connection method
THR solder connection
Material Contact carrier
PA 6.6
Material Contact
CuZn
Material Contact surface
Au
Flammability rating according to UL 94
V0
Connection 1
Head design
Pin
Head cable outlet
straight
Head thread type
M12
Coding
B
Ambient temperature (operation)
-40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (Cable, flexible installation)
Mechanical data
Insertion/withdrawal cycles
> 100
Ambient conditions
Degree of protection
IP67
Ambient temperature (operation) (male connector/female connector)
-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
Ambient temperature (operation) (Cable, flexible installation)
-25 °C ... 85 °C (Cable, flexible installation)
Ambient temperature (operation) (Cable, fixed installation)
