UMK-32 RM/MR-G24/1/PLC - Active module

2979472

VARIOFACE output module, with 32 miniature relays, 1 N/O contact each, plugged, for 24 V DC (incl. relay)

Product details

Product type	Interface module
No. of channels	32
Operating mode	100% operating factor
Mechanical service life	2x 10⁷ cycles
Compatible components	Miniature relay, REL-MR-G 24/1
With components	yes
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Rated insulation voltage	300 V AC
Rated surge voltage	4 kV (Basic insulation)
Supported controller SIEMENS S7-1500
Suitable I/O card	6ES7521-1BL00-0AB0
	6ES7522-1BL00-0AB0
	6ES7522-1BL01-0AB0
Supported controller SIEMENS S7-400
Suitable I/O card	6ES7422-1BL00-0AA0
	6ES7422-7BL00-0AB0
Supported controller ALLEN-BRADLEY PLC 5
Suitable I/O card	1771 OBN
Supported controller EMERSON DeltaV
Suitable I/O card	VE4002S1T2B6
Supported controller GE-FANUC RX3i
Suitable I/O card	IC694MDL754
Supported controller HONEYWELL Experion PKS C200
Suitable I/O card	TC-ODD 321
Supported controller MITSUBISHI MELSEC L
Suitable I/O card	LY41PT1P
	LY42PT1P
Supported controller MITSUBISHI MELSEC Q
Suitable I/O card	QY81P
	QY82P
Supported controller SCHNEIDER ELECTRIC Modicon TSX QUANTUM
Suitable I/O card	DDO 353
Supported controller SIEMENS S7-300 / ET 200 M
Suitable I/O card	6ES7322-1BL00-0AA0
Supported controller SIEMENS ET 200SP HA
Suitable terminal block	6DL1193-6TP00-0BH1
	6DL1193-6TP00-0DH1
	6DL1193-6TP00-0BM1
	6DL1193-6TP00-0DM1
Suitable I/O module	6DL1131-6BL00-0PH1 (Terminal Block H1/M1)
	6DL1132-6BL00-0PH1 (Terminal Block H1/M1)

Nominal input voltage U_N	24 V DC
Input voltage range in reference to U_N	0.8 ... 1.1
Input voltage range	19.2 V DC ... 26.4 V DC
Typical input current at U_N	6.5 mA
Typical response time	5 ms
Typical release time	15 ms
Protective circuit	Freewheeling diode; Freewheeling diode
	Reverse polarity protection; Polarity protection diode
Operating voltage display	Green LED
Status display/channel	Yellow LED

Compatible components	Miniature relay, REL-MR-G 24/1
Switching
Contact switching type	1 N/O contact
Type of switch contact	Double contact
Contact material	AgNi, 5 µm hard gold-plated
Maximum switching voltage	250 V AC
	125 V DC
Minimum switching voltage	5 V
Limiting continuous current	3 A
Maximum inrush current	5 A
Min. switching current	1 mA
Interrupting rating (ohmic load) max.	72 W (24 V DC)
	60 W (48 V DC)
	50 W (60 V DC)
	50 W (110 V DC)
	750 VA (250 V AC)
Error detection (line break / short-circuit)	no

Controller level
Connection method	IDC/FLK pin strip
Number of connections	1
Number of positions	50
Pitch	2.54 mm
Field level
Connection method	Screw connection
Stripping length	6 mm
Screw thread	M3
Number of connections	64
Conductor cross-section rigid	0.14 mm² ... 1.5 mm²
Conductor cross-section flexible	0.14 mm² ... 1.5 mm²
Conductor cross-section AWG	26 ... 16
Supply
Connection method	Screw connection
Stripping length	6 mm
Screw thread	M3
Number of connections	4
Number of positions	2
Conductor cross-section rigid	0.14 mm² ... 1.5 mm²
Conductor cross-section flexible	0.14 mm² ... 1.5 mm²
Conductor cross-section AWG	26 ... 14

Status display present	yes

Width	202.5 mm
Height	77 mm
Depth	52.5 mm

Color	gray (RAL 7042)

Ambient conditions
Degree of protection	IP00
Ambient temperature (operation)	-20 °C ... 50 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C

Standards/regulations	EN 61010-2-201
	IEC 60664

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Notes on operation	Observe the maximum switching power of the relays used
Notes on operation	Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.
Notes on operation	The outputs are not suitable for switching different line conductors. The sum of the switching voltages used for adjacent outputs must not exceed the rated insulation voltage value
Notes on operation	The necessary requirements for insulation (basic insulation or reinforced insulation) from adjacent modules (in DIN-rail direction) must be realized by applying suitable measures (e. g., partition plates).
Notes on operation	For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.

Commercial data

Item number	2979472
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	DK2191
Product key	DK2191
GTIN	4017918130367
Weight per piece (including packing)	459 g
Weight per piece (excluding packing)	403,83 g
Customs tariff number	85364190
Country of origin	DE

Classifications

Approvals

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
keine
	24 V	3 A

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
keine
	24 V	3 A

Environmental product compliance

Compatible products

Accessories

Your advantages

Narrow design width of just 55 mm (8 channels) or 202 mm (32 channels)

Universal applications from 1 mA to 3 A continuous current thanks to 2-layer double contact with hard gold plating

LED status indicator per signal path and supply voltage

Freewheeling and polarity protection diode for each signal path

Plug-in miniature relays each with an N/O contact

ECLASS-13.0	27141152
ECLASS-15.0	27141152

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Hexahydromethylphthalic anhydride (CAS: n/a)
REACH candidate substance (CAS No.)		Lead (CAS: 7439-92-1)
SCIP	1075b1cd-56c1-4dc4-a6c1-a3443c2e5644

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

UMK-32 RM/MR-G24/1/PLC - Active module

2979472

Product details

ECLASS

ETIM

UNSPSC

cUL Recognized

UL Recognized

EAC

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

UMK-32 RM/MR-G24/1/PLC - Active module 2979472

Product details

ECLASS

ETIM

UNSPSC

Compatible products

FLK 50/EZ-DR/ 50/KONFEK - Cable 2289065

FLK 50/EZ-DR/ 100/KONFEK - Cable 2289078

FLK 50/EZ-DR/ 150/KONFEK - Cable 2289081

FLK 50/EZ-DR/ 200/KONFEK - Cable 2289094

FLK 50/EZ-DR/ 250/KONFEK - Cable 2289104

FLK 50/EZ-DR/ 300/KONFEK - Cable 2289117

FLK 50/EZ-DR/ 400/KONFEK - Cable 2289133

FLK 50/EZ-DR/ 450/KONFEK - Cable 2289573

FLK 50/EZ-DR/ 500/KONFEK - Cable 2289586

FLK 50/EZ-DR/ 600/KONFEK - Cable 2289609

FLK 50/EZ-DR/ 700/KONFEK - Cable 2289625

FLK 50/EZ-DR/ 750/KONFEK - Cable 2289638

FLK 50/EZ-DR/ 800/KONFEK - Cable 2289641

FLK 50/EZ-DR/ 900/KONFEK - Cable 2289667

FLK 50/EZ-DR/1000/KONFEK - Cable 2289683

FLK 50/EZ-DR/ 50/KONFEK/S - Cable 2299097

FLK 50/EZ-DR/ 100/KONFEK/S - Cable 2299107

FLK 50/EZ-DR/ 150/KONFEK/S - Cable 2299110

FLK 50/EZ-DR/ 200/KONFEK/S - Cable 2299123

FLK 50/EZ-DR/ 300/KONFEK/S - Cable 2299136

FLK 50/EZ-DR/ 400/KONFEK/S - Cable 2299149

FLK 50/EZ-DR/ 600/KONFEK/S - Cable 2299152

FLK 50/EZ-DR/1000/KONFEK/S - Cable 2299178

CABLE-FLK50/0,14/HF/ 0,5M - Cable 2314134

CABLE-FLK50/0,14/HF/ 1,0M - Cable 2314147

CABLE-FLK50/0,14/HF/ 1,5M - Cable 2314150

CABLE-FLK50/0,14/HF/ 2,0M - Cable 2314163

CABLE-FLK50/0,14/HF/ 2,5M - Cable 2314176

CABLE-FLK50/0,14/HF/ 3,0M - Cable 2314189

CABLE-FLK50/0,14/HF/ 4,0M - Cable 2314192

CABLE-FLK50/0,14/HF/10,0M - Cable 2314244

CABLE-FLK50-0,14-HF/... - Cable 2314257

REL-MR-G 24/1 - Single relay 2961037

Your advantages

UMK-32 RM/MR-G24/1/PLC - Active module

2979472