Y distributor, 4-position, shielded, Plug straight M12, coding: S, on Socket straight M12, coding: S and Socket straight M12, coding: S, for alternating current up to 16 A/630 V, Parallel distributor
| Assembly note | NOTE: Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Application | Energy supply |
| Number of positions | 4 |
| No. of cable outlets | 2 |
| Shielded | yes |
| Coding | S |
| Thread type | M12 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Nominal voltage UN | 630 V AC |
| Nominal current IN | 16 A (at 40 °C) |
| Status display | no |
| Status display present | no |
| Dimensional drawing |
|
| Width | 28 mm |
| Height | 47 mm |
| Length | 62.5 mm |
| Center distance | 35 mm |
| Material | CuZn (Pin contact) |
| (Female contact) | |
| Flammability rating according to UL 94 | V0 |
| Seal material | NBR |
| Material of grip body | PBT |
| Contact surface material | Au |
| Contact carrier material | PBT |
| Material for screw connection | Brass, nickel-plated |
| Connection 1 | |
| Type | Plug straight M12 |
| Coding type | S |
| Connection 2 | |
| Type | Socket straight M12 |
| Coding type | S |
| Connection 3 | |
| Type | Socket straight M12 |
| Coding type | S |
| Mechanical data | |
| Insertion/withdrawal cycles | > 100 |
| Ambient conditions | |
| Degree of protection | IP65 |
| Ambient temperature (operation) | -40 °C ... 85 °C (Plug / socket) |
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-111 |
| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| keine | ||||
| for AC application only | 600 V | 16 A | ||
| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| keine | ||||
| for AC application only | 600 V | 15 A | ||
