Plug-in octal relay with power contacts, specially designed for switching high DC loads, 1 N/O contact, detectable manual operation, status LED, coil voltage: 24 V DC
Product details
Product type
Single relay
Operating mode
100% operating factor
Mechanical service life
approx. 107 cycles
Insulation characteristics
Overvoltage category
III
Pollution degree
3
Data management status
Date of last data management
05.09.2025
Maximum power dissipation for nominal condition
1.32 W
Test voltage (Winding/contact)
2.5 kVrms (50 Hz, 1 min., winding/contact)
Coil side
Nominal input voltage UN
24 V DC
Input voltage range
15.6 V DC ... 36 V DC
Input voltage range in reference to UN
see diagram
Typical input current at UN
55 mA
Typical response time
20 ms
Typical release time
30 ms
Protective circuit
Freewheeling diode
Operating voltage display
Yellow LED
Coil resistance
443 Ω ±10 %
Switching
Contact switching type
1 N/O contact
Type of switch contact
Single contact
Note regarding the switch contact
Series connection, 2 N/O contacts
Contact material
AgNi
Maximum switching voltage
250 V AC
220 V DC
Minimum switching voltage
10 V (at 10 mA)
Limiting continuous current
10 A
Maximum inrush current
30 A (20 ms)
Min. switching current
10 mA (at 10 V)
Interrupting rating (ohmic load) max.
2500 VA (for 250 V AC)
Width
35 mm
Height
35 mm
Depth
58.5 mm
Ambient conditions
Degree of protection
RT I
Ambient temperature (operation)
-40 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Standards/regulations
IEC 61810
EN 60947
Assembly note
On relay base PR3
Mounting position
any
Item number
2901908
Packing unit
10 pc
Minimum order quantity
1 pc
Note
Made to order (non-returnable)
Sales key
CK
Product key
DK6193
GTIN
4046356667241
Weight per piece (including packing)
105.6 g
Weight per piece (excluding packing)
94.34 g
Customs tariff number
85364190
Country of origin
ES
China RoHS
Environment friendly use period (EFUP)
EFUP-5
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
