CMS-GTGL 0,75
- Engraving tool
CMS-GTGL 0,75
- Engraving tool
5062726
Chisel, for engraving spindle CMS-GRAVUR KGS 1, hard metal, cutting width: 0.75 mm
Plotter and engraver
Our plotter marks high-quality marking materials to create durable markings. Simply switching the standard plotter head with the engraving unit converts the plotter into an engraving system. Markings created with this system are very durable even under extreme conditions.
CMS-D/AD PLOTTER
- Adapter
CMS-D/AD PLOTTER
- Adapter
5067938
Adapter
CMS-GTGL 1,5
- Engraving tool
CMS-GTGL 1,5
- Engraving tool
5061727
Chisel, for engraving spindle CMS-GRAVUR KGS 1, hard metal, cutting width: 1.5 mm
P1 GRAVER 0.7
- Engraving tool
P1 GRAVER 0.7
- Engraving tool
5145517
Engraving tool, with a point angle of 15°, point diameter: 0.7 mm
CMS-VAC-PL 3
- Vacuum clamping plate
CMS-VAC-PL 3
- Vacuum clamping plate
5066528
Vacuum clamping plate, incl. rubber pad, clamping surface: 500 x 500 x 28 mm, color: Silver colored
CMS-GTGL 1,0
- Engraving tool
CMS-GTGL 1,0
- Engraving tool
5061675
Chisel, for engraving spindle CMS-GRAVUR KGS 1, hard metal, cutting width: 1.0 mm
P1 ENGRAVING VC
- Accessories
P1 ENGRAVING VC
- Accessories
5145708
Suction unit for ENGRAVING UNIT and P1 ENGRAVING UNIT engraving systems
CMS-P1-M/MURR 400
- Magazine insert
CMS-P1-M/MURR 400
- Magazine insert
5144945
Plastic magazine for CMS-P1 plotter. To accept 2 Murrplastik sheets KS 4/12, 4/18, 4/23, 4/30
CMS-P1-PLOTTER-COVER
- Covering hood
CMS-P1-PLOTTER-COVER
- Covering hood
5144806
Covering hood
CMS-GTM-SORTI
- Range of milling cutters
CMS-GTM-SORTI
- Range of milling cutters
5068034
Assortment of milling cutters, consisting of CMS-GTM 0,4 to CMS-GTM 3,0, two of each
Your advantages
- Easy operation of the plotter with the PROJECT complete marking software
- Fast startup with a USB and Centronics interface
- User-friendly: clear operation with just four keys
The plotter with engraving unit
The plotter with engraving unit is the ideal marking system for use in workshops.
You can use the system to engrave metals and special double-layer plastics. Engraving chisels are available with diameters ranging from 0.2 to 1.0 mm for creating different line thicknesses.
Engraved labels can be used, for example, to mark cables that are laid in the ground.
Create durable markings for aggressive environments.