Panel feed-through, with wire output 1.5 mm2 and 0.5 m litz wire: connecting thread: M20x1.5, 4-pos., black
| Product type | Panel feed-through |
| Number of positions | 4 |
| Position marking | 1, 2, 3, 4 |
| Number of connections | 4 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Connection technology | |
| Connection method On the device side | Single wires (50 cm long; 1.5 mm²) |
| Frequency of connections between conductors of the same cross section | max. 10 (if the conductor is connected more than once, seal and cap may need to be replaced.) |
| Conductor connection | |
| Conductor cross section flexibel | 0.75 mm² ... 1.5 mm² |
| Conductor cross section solid | 0.75 mm² ... 1 mm² |
| Connection cross section AWG | 18 ... 16 |
| Tightening torque Union nut | 3 Nm |
| Tightening torque Contact carrier | 4.5 Nm |
| Tightening torque Locking nut | 4.5 Nm |
| Wrench size Union nut | 19 mm |
| Wrench size Contact carrier | 24 mm |
| Pin assignment | |
| Contact | Color (signal designation) | Contact (optional) | 1 | BN |
| 2 | WH | |
| 3 | BU | |
| 4 | BK | |
| Dimensional drawing |
|
| Width | 24 mm |
| Height | 24 mm |
| Length | 55.9 mm |
| Rated surge voltage (II/2) | 6 kV |
| Rated surge voltage (III/2) | 6 kV |
| Rated surge voltage (III/3) | 6 kV |
| Rated current | 15 A |
| Contact resistance | < 3 mΩ |
| rated voltage (II/2) | 1000 V (with insulating sleeve) |
| rated voltage (III/2) | 800 V (with insulating sleeve) |
| Rated voltage (III/3) | 500 V |
| Nominal voltage UN | 500 V AC |
| 500 V DC | |
| Nominal current IN | 15 A |
| Color | black (RAL 9005) |
| Material Housing | PA |
| Material Contact | CuZn |
| Material Contact surface | tin-plated |
| Flammability rating according to UL 94 | V0 |
| Material wire insulation | PVC / PE |
| Cable length | 0.5 m |
| Structure of individual litz in acc. with VDE 0295 / smallest wire diameter | VDE 0295 class 1 to 6/min. 0.15 mm |
| External cable diameter | 6 mm ... 12 mm |
| Wire diameter including insulation | 1.8 mm ... 3 mm |
| Position marking | 1, 2, 3, 4 |
| Material wire insulation | PVC / PE |
| Mounting type | Front mounting M20 |
| Assembly note | If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. |
| Ambient conditions | |
| Degree of protection | IP65 |
| IP67 | |
| Impact strength | IK07 |
| Ambient temperature (operation) | -40 °C ... 80 °C |
| -25 °C ... 50 °C | |
| Temperature when conductor connected | -5 °C ... 50 °C |
| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| 250 V | 11 A |
| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| 250 V | 15 A |
| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| 500 V | 0.75 - 1.5 |
