ELR H3-I-SC-230AC/500AC-2 - Hybrid motor starter - 2900544

Product type	Hybrid motor starters
Product family	CONTACTRON
Operating mode	100% operating factor

Number of phases	3
Motor starter type	Direct starter
Switching frequency	≤ 2 Hz (Load-dependent)
Maximum power dissipation for nominal condition	2.2 W
Switching frequency	≤ 2 Hz (Load-dependent)
Maximum power dissipation	4.7 W
Minimum power dissipation	2.6 W
Coordination type	1
Supply
Rated control circuit supply voltage U_S	230 V AC
Control supply voltage range	85 V AC ... 253 V AC
Rated control supply current I_S	4 mA
Mains frequency	50/60 Hz
Protective circuit	Surge protection
Insulation characteristics
Rated insulation voltage	500 V
Rated surge voltage	4 kV
Overvoltage category	III
Degree of pollution	2
Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit	Safe isolation (IEC 60947-1) at operating voltage ≤ 300 V AC
		Safe isolation (EN 50178) at operating voltage ≤ 300 V AC
		Basic insulation (IEC 60947-1) at operating voltage 300 V AC ... 500 V AC
		Safe isolation (EN 50178) at operating voltage 300 ... 500 V AC
Isolation characteristics between the control input and control supply voltage to auxiliary circuit	Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
		Safe isolation (EN 50178) in the auxiliary circuit ≤ 300 V AC

Control
Input name	Control input
Rated actuating voltage U_C	230 V AC
Triggering voltage range	85 V AC ... 253 V AC
Rated actuating current I_C	7 mA (Input type 1)
Mains frequency	50 Hz 60 Hz 50/60 Hz
Switching threshold	44 V AC (“0” signal)
Switching threshold		85 V AC (“1” signal)
Typical turn-off time	< 70 ms

AC output
Rated operating voltage U_e	500 V AC
Operating voltage range	42 V AC ... 550 V AC
Rated operating current I_e	2.4 A (AC-51)
Rated operating current I_e		2.4 A (AC-53a)
Mains frequency	50/60 Hz
Load current range	180 mA ... 2.4 A (see to derating)
Trigger characteristic in acc. with IEC 60947-4-2	Class 10A
Cooling time	20 min (for auto reset)
Leakage current	0 mA
Protective circuit	Surge protection
Acknowledge output
Note	Confirmation: floating change-over contact, signal contact
Contact switching type	1 changeover contact
Switching capacity in accordance with IEC 60947-5-1	3 A (230 V, AC15)
Switching capacity in accordance with IEC 60947-5-1		2 A (24 V (DC13))

Control circuits
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque		5 lb_f-in. ... 7 lb_f-in.
Load circuit
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque		5 lb_f-in. ... 7 lb_f-in.

Status display	LED (yellow)
Operating voltage display	Green LED
Error indication	Red LED

Width	22.5 mm
Height	107 mm
Depth	114 mm

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ELR H3-I-SC-230AC/500AC-2 - Hybrid motor starter

2900544

Product details

ECLASS

UNSPSC

Compatible products

Your advantages

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m

UL approval
Certificate	NLDX.E228652
UL data
SCCR	100 kA (500 V AC (fuse: 30 A class CC/30 A class J (high fault)))
SCCR		5 kA (500 V AC (fuse: 20 A RK5 (standard fault)))
FLA	2.4 A (500 V AC)
Group installation	20 A (class RK5, SCCR 5kA, #24 - 14 AWG max. solid and stranded)
Group installation		30 A (class CC or J, SCCR 100kA, #24 - 14 AWG max, solid and stranded)
Category code	NLDX / NRNT

Standards/regulations
Standards/regulations	IEC 60947-1
		IEC 60947-4-2
		IEC 61508
		ISO 13849

Mounting type	DIN rail mounting
Assembly note	alignable, for spacing see derating
Mounting position	vertical (horizontal DIN rail, motor output below)

Item number	2900544
Packing unit	1 pc
Minimum order quantity	1 pc
Note	Made to order (non-returnable)
Sales key	CK
Product key	DK7421
Catalog page	Page 35 (C-5-2019)
GTIN	4046356527699
Weight per piece (including packing)	292.9 g
Weight per piece (excluding packing)	204.1 g
Customs tariff number	85371099
Country of origin	DE

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ELR H3-I-SC-230AC/500AC-2 - Hybrid motor starter 2900544

Product details

ECLASS

UNSPSC

Compatible products

US-EMLP (15X5) - Plastic label 0828790

UC-EMLP (15X5) - Plastic label 0819301

BRIDGE- 2 - Bridge 2900746

BRIDGE- 3 - Bridge 2900747

BRIDGE- 4 - Bridge 2900748

BRIDGE- 5 - Bridge 2900749

BRIDGE- 6 - Bridge 2900750

BRIDGE- 7 - Bridge 2900751

BRIDGE- 8 - Bridge 2900752

BRIDGE- 9 - Bridge 2900753

BRIDGE-10 - Bridge 2900754

BRIDGE- 2-1M - Bridge 2901542

BRIDGE- 3-1M - Bridge 2901655

BRIDGE- 4-1M - Bridge 2901658

BRIDGE- 5-1M - Bridge 2901544

BRIDGE- 6-1M - Bridge 2901649

BRIDGE- 2-3M - Bridge 2901543

BRIDGE- 3-3M - Bridge 2901656

BRIDGE- 4-3M - Bridge 2901659

BRIDGE- 5-3M - Bridge 2901545

BRIDGE- 6-3M - Bridge 2901697

BRIDGE- 7-3M - Bridge 2901698

BRIDGE- 8-3M - Bridge 2901700

BRIDGE- 9-3M - Bridge 2901701

BRIDGE-10-3M - Bridge 2901702

BRIDGE- 2- 2M/0,3M - Bridge 2909897

BRIDGE- 3- 2M/0,3M - Bridge 2909898

BRIDGE- 4- 2M/0,3M - Bridge 2909899

Your advantages

ELR H3-I-SC-230AC/500AC-2 - Hybrid motor starter

2900544