P1 GRAVER 0.5
- Engraving tool
P1 GRAVER 0.5
- Engraving tool
5145504
Engraving tool, with a point angle of 15°, point diameter: 0.5 mm
Plotter and engraver
Our plotter marks high-quality marking materials to create durable markings. Simply switching the standard plotter head with the engraving unit converts the plotter into an engraving system. Markings created with this system are very durable even under extreme conditions.
CMS-P1-M/ZB
- Magazine insert
CMS-P1-M/ZB
- Magazine insert
5144699
Plastic magazines for CMS-P1-PLOTTER and PLOTMARK. For accommodating 22 zack marker strips
CMS-GTG 3,0
- Fully hard metal chisel
CMS-GTG 3,0
- Fully hard metal chisel
5066560
Fully hard metal chisel, 1 cutting edge, cutting width: 3.0 mm
CMS-GTM 2,0
- Fully hard metal milling cutter
CMS-GTM 2,0
- Fully hard metal milling cutter
5061662
Fully hard metal milling cutter, 2 cutting edges, milling width: 2.0 mm
P-PEN ADAPTER
- Adapter
P-PEN ADAPTER
- Adapter
0815224
Aluminum adapter, to fix the P-PEN during plotter marking
CMS-GRAV-WZ/ER
- Accessories
CMS-GRAV-WZ/ER
- Accessories
5066256
Fixing rings, for presetting the processing tools
CMS-P1-PREPLATES
- Plotter accessories
CMS-P1-PREPLATES
- Plotter accessories
5145135
50 marking preparation plates for the pen station of the plotter systems
CMS-GRAV-ZNH 15/32
- Accessories
CMS-GRAV-ZNH 15/32
- Accessories
5067459
Tracing sleeve, for mechanical surface scanning
CMS-P1-PENDEPOT
- Plotter accessories
CMS-P1-PENDEPOT
- Plotter accessories
5144835
4 replacement seals for the pen station of the plotter systems and 10 marking preparation plates
P1 GRAVER 1.0
- Engraving tool
P1 GRAVER 1.0
- Engraving tool
5145520
Engraving tool, with a point angle of 15°, point diameter: 1.0 mm
Your advantages
- Easy operation of the plotter with the PROJECT complete marking software
- Fast startup with a USB and Centronics interface
- User-friendly: clear operation with just four keys
The plotter with engraving unit
The plotter with engraving unit is the ideal marking system for use in workshops.
You can use the system to engrave metals and special double-layer plastics. Engraving chisels are available with diameters ranging from 0.2 to 1.0 mm for creating different line thicknesses.
Engraved labels can be used, for example, to mark cables that are laid in the ground.
Create durable markings for aggressive environments.