The field multiplexer is the central unit of a field multiplexer station. All the necessary Inline I/O terminals of a station are connected to it. The field multiplexer exchanges data with the remote station via a remote bus cable.
IB IL 24 MUX MA
-
Inline terminal
2718413
Inline field multiplexer, without accessories, transmission of very remote signals without configuration
Product details
| Dimensional drawing |
|
| Width | 48.8 mm |
| Height | 119.8 mm |
| Depth | 71.5 mm |
| Color | green |
| Inline local bus | |
| Connection method | Inline data jumper |
| Transmission speed | 500 kbps |
| Remote bus | |
| Connection method | Inline shield connector |
| Supply voltage | |
| Connection method | 8-pos. Inline power connector |
| Programming data | |
| Register length (master) | 512 bit |
| Product type | I/O component |
| Product family | Inline |
| Type | modular |
| Test section | RS-485 interface / supply voltage 500 V AC |
| RS-485 interface / local bus 500 V AC | |
| Protective circuit | Reverse polarity protection |
| Supply | |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30 V DC (including ripple) |
| Max. total permissible current consumption of all I/O terminal blocks | Communications power (7,5 V DC) ≤ 2 A |
| Analog supply (24 V DC) ≤ 0.5 A | |
| Residual ripple | ± 1.2 V |
| Typical current consumption | < 60 mA (without connected I/O terminal blocks (24 V DC supply)) |
| 1.25 A (with max. number of connected I/O terminal blocks (24 V DC supply)) | |
| 8 A (If this value is exceeded, further power or segment terminals must be used!) | |
| Connection technology | |
| Connection name | Inline connector |
| Inline connector | |
| Connection method | Spring-cage connection |
| Conductor cross-section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross-section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 28 ... 16 |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C ... 55 °C |
| Permissible humidity (operation) | 75 % ... 85 % |
| Air pressure (operation) | 80 kPa ... 106 kPa (up to 2000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Mounting type | DIN rail mounting |
Your advantages
From hardware version 15, approved for use in potentially explosive areas of zone 2
Diagnostic and status indicators
Remote bus connections using copper technology