C S6 A 480X480X210
-
Empty enclosure
0899099
Empty enclosure, material: Stainless steel, 316L/1.4404, surface resistance: brushed, silver-colored, 480 mm x 480 mm x 210 mm, type of locking: Door with replaceable hinge, scope of supply - ATD: Door hinge with quarter turn locking, Mounting panel, Double-bit key, Fixing angle with mounting screws, M12 grounding bolts, affixed externally, Installation notes, Door hinge with quarter turn locking
This product needs further products for operation.
Mandatory accessories
Product details
| Product type | Terminal box |
| Scope of supply | Door hinge with quarter turn locking |
| Mounting panel | |
| Double-bit key | |
| Fixing angle with mounting screws | |
| M12 grounding bolts, affixed externally | |
| Installation notes | |
| Insulation characteristics | |
| Protection class | I |
| Maximum power dissipation | 27 W (T6 up to 40 °C) |
| 16.8 W (T6 up to 55 °C) | |
| 10.1 W (T6 up to 65 °C) | |
| 37.1 W (T5 up to 40 °C) | |
| 27 W (T5 up to 55 °C) | |
| 20.3 W (T5 up to 65 °C) | |
| 43.9 W (T4 up to 40 °C) | |
| 21.1 W (T4 up to 55 °C) | |
| 27 W (T4 up to 65 °C) |
| Dimensional drawing |
|
| Width | 480 mm |
| Height | 480 mm |
| Depth | 210 mm |
| Clearance width, maximum DIN rail length | 848 mm |
| Max. material thickness | 1.5 mm |
| Color | silver-colored |
| Material | Stainless steel, 316L/1.4404 |
| Seal material | Silicon |
| Surface characteristics | brushed |
| Note | 240 grain |
| General | |
| Type of locking (GRP) | Door with replaceable hinge Quarter turn locking with two-way key bit |
| Degree of protection (IP code) | |
| Degree of protection | IP66 |
| Ambient conditions | |
| Ambient temperature (operation) | -55 °C ... 135 °C |
| Assembly note | External fixing clips |
Your advantages
Innovative product range of high-quality stainless steel housings as the basis for individual terminal boxes
Reduced assembly and approval effort thanks to ready-equipped terminal boxes
Flange plates possible on four sides of the housing, including seal protection
Housing adjustments using threads, bore holes, and rectangular cutouts with consideration given to normative specifications