HC-EVO-B10PT-BWD-HL-M25-PLRBK
-
Connector set
1407711
EVO connector set consisting of: 1407729, 1407730, 1407634, 1407628, 1407670
Product details
| Product type | Connector set |
| Housing type | Complete housing |
| Series | HC-B |
| Type | B10 |
| Number of positions | 10 |
| Connection profile | 10+PE |
| Contact numbering | 1 - 10 |
| No. of cable outlets | 1 |
| Type of the screw connection | 1x M25 |
| Protective cover | no |
| Cable outlet | straight |
| Pg screw connection | none |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Rated voltage (III/3) | 500 V |
| Rated surge voltage | 6 kV |
| Rated current | 16 A |
| Connection method | Push-in connection |
| Connection technology | Push-in connection |
| Conductor cross section | 0.14 mm² ... 2.5 mm² (with ferrule) |
| 0.14 mm² ... 2.5 mm² (with ferrule) | |
| Connection cross section AWG | 26 ... 14 (with ferrule) |
| Tightening torque | 0.5 Nm ... 1.7 Nm (Fixing screws for panel mounting base) |
| Dimensional drawing |
|
| Width | 53 mm |
| Height | 106 mm |
| Length | 93.5 mm |
| Drill hole distance, horizontal | 83 mm |
| Drill hole distance, vertical | 32 mm |
| Installation dimensions | |
| Width of the assembly cutout | 35 mm |
| Length of the assembly cutout | 65 mm |
| Flammability rating according to UL 94 | V0 |
| Seal material Profile gasket | NBR |
| Seal material Flat gasket | NBR |
| Housing material | PA |
| Contact material | Copper alloy |
| Contact surface material | Ag |
| Contact carrier material | PC |
| Locking latch material | PA |
| External cable diameter | 9 mm ... 17 mm |
| Mechanical data | |
| Type of the screw connection | 1x M25 |
| Locking type | Latch |
| Insertion/withdrawal cycles | ≥ 500 |
| Ambient conditions | |
| Degree of protection | IP66 |
| Enclosure rating (NEMA) | 12 (UL 50e) |
| Impact strength | IK09 |
| Ambient temperature (operation) | -40 °C ... 100 °C |
| Assembly note | Connectors may only be operated when there is no load/the power is switched off. Can be used for solid wires and stranded wires with ferrule. |
Your advantages
Lower costs than metal version
Labeling option using 9 x 20 mm marking label
Low weight
Lower risk of condensation