CHARX SEC-1000 - AC charging controller - 1139034

Product type	AC charging controller
Product family	CHARX control modular
Charging mode	Mode 3, Case B + C
Operating mode	Stand-Alone
	Client
Modem for communication present	no
Connectable peripheral devices	Energy meter
	RFID
	DC residual current detection

Supply
Supply voltage	12 V DC ±5 %
Supply voltage range	11.4 V DC ... 12.6 V DC
Current consumption	max. 2 A (Stand-alone operation)
	< 50 mA (No load, without external loads)
Insulation characteristics
Pollution degree	2 (in acc. with IEC 60664-1)
Overvoltage category	III

Digital
Number of digital inputs	4
Description of the input	Digital input
Nominal input voltage U_N	12 V
Input voltage range U1	0 V ... 3 V (Off)
Input voltage range U2	9 V ... 15 V (On)

Digital
Output name	Digital output
Number outputs	4
Maximum output voltage	≤ 12 V (Low-side operation)
Maximum output current	max. 600 mA

Push-in Technology
Conductor cross-section rigid	0.14 mm² ... 1.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 16
Cable cross-section range	0.25 mm² ... 1.5 mm² (with ferrules)
Stripping length of the individual wire	8 mm
	10 mm (for contactor control)

Interface	CHARX control modular system bus
Interface for energy meter
Interface	Energy meter
Bus system	RS-485
Transmission speed range	9.6 kbps ... 115.2 kbps (Automatic setting in accordance with the selected energy meter)
Interface for RFID reader
Interface	RFID readers
Bus system	RS-485
Transmission speed range	9.6 kbps ... 115.2 kbps (Automatic setting in accordance with the selected RFID reader)
Interface for CHARX control modular system bus
Interface	CHARX control modular system bus
Connection method	DIN rail bus connector
Number of interfaces	1
Interface for vehicle
Interface	Vehicle interface
Communication protocol	IEC 61851-1
Communication protocol		GB/T 18487
Proximity	IEC 61851-1
Proximity		GB/T 18487
Control voltage	± 12 V (Locking actuator)
Locking release in the event of mains failure	Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet
Rated current	2 A
Interface for residual current detection
Interface	Residual current detection
Sensor supply voltage	12 V DC
Signal level	12 V (Different terminal points)
		0 V (Different terminal points)
		12 V
Interface for temperature monitoring
Interface	Temperature monitoring
Sensor type	Pt 1000
Sensor type		PTC chain
Tripping characteristic	configurable
Interface for contactor control
Interface	Contactor control
Interface description	Floating switch contact
Switching voltage	max. 250 V AC
Switching voltage		max. 30 V DC
Rated current	2 A
Interrupting rating	max. 1500 VA

Charging controller
Width	18.8 mm
Height	121 mm
Depth	85 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 65 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above mean sea level)
Air pressure (storage/transport)	58 kPa ... 106 kPa (up to 4500 m above mean sea level)

Mounting type	DIN rail mounting
Assembly note	DIN rail mounting
Mounting position	any

Item number	1139034
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	XWBRDA
Product key	XWBRDA
GTIN	4063151080198
Weight per piece (including packing)	173 g
Weight per piece (excluding packing)	117 g
Customs tariff number	85371091
Country of origin	Information on the country of origin is provided with the delivery.

ECLASS-13.0	27144703
ECLASS-15.0	27144703

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

CHARX SEC-1000 - AC charging controller

1139034

Product details

ECLASS

ETIM

UNSPSC

Compatible products

Your advantages

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	005412f6-a46a-4bce-b9db-d29e0cd85fd8

Standards
Standards/regulations	IEC 61851-1

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

CHARX SEC-1000 - AC charging controller 1139034

Product details

ECLASS

ETIM

UNSPSC

Compatible products

EV-RCM-6DC-WAT - Differential current monitoring 1309697

EV-RCM-6DC-WAT-X10 - Differential current monitoring 1309695

EV-RFID-ELT-PCB - RFID device 1309772

EV-RFID-ELT-PCB-X10 - RFID device 1309752

EV-RFID-ELT-IP65 - RFID device 1309687

CHARX SEC JST-RCM-CBL - Cable set 1360462

ISKRA WM3M4C ENERGYMETER - Measuring device 1429603

EV-T2M3SO12-3P-P-SET - Infrastructure charging socket 1164422

EV-T2M3SO12-4P-P-SET - Infrastructure charging socket 1164423

EV-T2M3SO12-3P-BL-SET - Infrastructure charging socket 1268358

EV-T2M3SO12-4P-BL-SET - Infrastructure charging socket 1268355

EV-T2M3SO12-3P-B-SET - Infrastructure charging socket 1164420

EV-T2M3SO12-4P-B-SET - Infrastructure charging socket 1164417

CHARX RFID/NFC-PCB - RFID/NFC device 1391227

CHARX RFID/NFC-PCB-X10 - RFID/NFC device 1399372

CHARX SEC JST-RCM-CBL 100 - Cable set 1486193

STEP3-PS/1AC/12DC/1.3/PT - Power supply 1170952

STEP3-PS/1AC/12DC/2.5/PT - Power supply 1170953

STEP3-PS/1AC/12DC/5/PT - Power supply 1170955

UNO2-PS/1AC/12DC/30W/PT - Power supply 1399935

Your advantages

Frequently searched

CHARX SEC-1000 - AC charging controller

1139034