P1 UC-MAG 2
- Magazine
P1 UC-MAG 2
- Magazine
5146082
Magazine, for CMS-P1-PLOTTER, for accommodating UC-WMC 4.4...
Plotter and engraver
Our plotter marks high-quality marking materials to create durable markings. Simply switching the standard plotter head with the engraving unit converts the plotter into an engraving system. Markings created with this system are very durable even under extreme conditions.
CMS-GTG 0,3
- Fully hard metal chisel
CMS-GTG 0,3
- Fully hard metal chisel
5061866
Fully hard metal chisel, 1 cutting edge, cutting width: 0.3 mm
CMS-GRAV-SZ 3/32
- Accessories
CMS-GRAV-SZ 3/32
- Accessories
5067446
Replacement collet chuck, for processing tools with a 3 mm shaft diameter
CMS-P1-M/GPE
- Magazine insert
CMS-P1-M/GPE
- Magazine insert
5144754
Plastic magazine for CMS-P1 plotter. For accommodating 1 GPE lable sheet
P1 UC-MAG 7
- Magazine
P1 UC-MAG 7
- Magazine
5146568
Magazine, for CMS-P1-PLOTTER and PLOTMARK, for accommodating: UC-WMCO...
CMS-GTG 0,75
- Fully hard metal chisel
CMS-GTG 0,75
- Fully hard metal chisel
5066557
Fully hard metal chisel, 1 cutting edge, cutting width: 0.75 mm
CMS-GTG 0,5
- Fully hard metal chisel
CMS-GTG 0,5
- Fully hard metal chisel
5066544
Fully hard metal chisel, 1 cutting edge, cutting width: 0.5 mm
CMS-GRAV 32-PAD 305X400X3
- Accessories
CMS-GRAV 32-PAD 305X400X3
- Accessories
5144974
Non-slip pads for fixing engraving plates on the engraving machine CMS GRAV 32, dimensions: 305 x 400 x 3 mm
CLEANING STICK
- Cleaning pen
CLEANING STICK
- Cleaning pen
5146697
Cleaning stick for fast and efficient printhead cleaning of all Phoenix Contact thermal transfer printers.
CMS-P1-M/ZBM
- Magazine insert
CMS-P1-M/ZBM
- Magazine insert
5144660
Plastic racks for CMS-P1 plotter. Accepts 2 zack marker sheets
Your advantages
- Easy operation of the plotter with the PROJECT complete marking software
- Fast startup with a USB and Centronics interface
- User-friendly: clear operation with just four keys
The plotter with engraving unit
The plotter with engraving unit is the ideal marking system for use in workshops.
You can use the system to engrave metals and special double-layer plastics. Engraving chisels are available with diameters ranging from 0.2 to 1.0 mm for creating different line thicknesses.
Engraved labels can be used, for example, to mark cables that are laid in the ground.
Create durable markings for aggressive environments.