P1 ENGRAVING VC BAG
- Accessories
P1 ENGRAVING VC BAG
- Accessories
5145559
Accessories for plotters with engraving unit
Plotter and engraver
Our plotter marks high-quality marking materials to create durable markings. Simply switching the standard plotter head with the engraving unit converts the plotter into an engraving system. Markings created with this system are very durable even under extreme conditions.
CMS-P1-M/WAGO WMB
- Magazine insert
CMS-P1-M/WAGO WMB
- Magazine insert
5144767
Plastic magazine for CMS-P1 plotter. Accepts 1 WAGO WMB mats
P1 GRAVER 0.4
- Engraving tool
P1 GRAVER 0.4
- Engraving tool
5145494
Engraving tool, with a point angle of 15°, point diameter: 0.4 mm
P1 ENGRAVING COVER
- Accessories
P1 ENGRAVING COVER
- Accessories
5145685
Accessories for plotters with engraving unit
P1 GRAVER SET
- Engraving chisel set
P1 GRAVER SET
- Engraving chisel set
5145533
Engraving stylus set, graver with a point angle of 15°, point diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.7 mm, 1.0 mm
P1 ENGRAVING TUBE
- Accessories
P1 ENGRAVING TUBE
- Accessories
5145601
Replacement suction tube and clamping piece for the suction unit
P1 ENGRAVING CC2
- Accessories
P1 ENGRAVING CC2
- Accessories
5145614
Replacement connection cable between control unit and marking plotter
CMS-GTM 1,0
- Fully hard metal milling cutter
CMS-GTM 1,0
- Fully hard metal milling cutter
5066751
Fully hard metal milling cutter, 2 cutting edges, milling width: 1.0 mm
P1 ENGRAVING UNIT
- Engraving unit
P1 ENGRAVING UNIT
- Engraving unit
5145546
Engraving unit, weight: 7.6 kg, length: 0.35 m, width: 250 mm
CMS-GRAV-WZ-ME/32
- Magazine insert
CMS-GRAV-WZ-ME/32
- Magazine insert
5067433
Tool magazine insert, replacement tool receptacle for the tool magazine
Your advantages
- Easy operation of the plotter with the PROJECT complete marking software
- Fast startup with a USB and Centronics interface
- User-friendly: clear operation with just four keys
The plotter with engraving unit
The plotter with engraving unit is the ideal marking system for use in workshops.
You can use the system to engrave metals and special double-layer plastics. Engraving chisels are available with diameters ranging from 0.2 to 1.0 mm for creating different line thicknesses.
Engraved labels can be used, for example, to mark cables that are laid in the ground.
Create durable markings for aggressive environments.