EV-T2M4CC-DC200A-5,5M50CSBK11 - DC charging cable

1665234

CHARX connect standard, CCS type 2, DC charging cable, up to 500 A in Boost mode, 200 A permanent, 1000 V DC, with vehicle charging connector and open cable end, Local production, cable: 5.5 m, black, straight, with connected PP contact, with replaceable mating face frame, with analog temperature sensors, no liquid cooling, PHOENIX CONTACT logo, NOTE: The cable length exceeds the normative specification of 10 m., IEC 62196-3, for charging electric vehicles (EV) with direct current (DC)

Trade restriction
CE note	The products are offered exclusively for export outside the EU and the European Economic Area.

Product type	DC charging cable
Product family	CHARX connect standard
Type	DC charging cable
	with vehicle charging connector and open cable end
	Local production
Design	with connected PP contact
	with replaceable mating face frame
	with analog temperature sensors
	no liquid cooling
Charging standard	CCS type 2
Charging mode	Mode 4
Affixed logo	PHOENIX CONTACT logo
Label	14.1 mm x 44.8 mm (customer logo on request)

Temperature monitoring	2x Pt 1000
Charging power and current (DC charging)
Type of charging current	DC
Charging power and current (DC charging in Boost Mode)
Type of charging current	DC Boost Mode
Charging current	up to 500 A DC
Charging power	up to 500 kW
Rated voltage	1000 V
Note	The specifications refer to charging in Boost Mode and are dependent on ambient conditions. For further details, see the packing slip in the download area.
Pin assignment (Power contacts)
Note on the connection method	Crimp connection, cannot be disconnected
Number	3 (PE, DC+, DC-)
Rated voltage	1000 V DC
Rated current	200 A (up to 40 °C)
Pin assignment (Signal contacts)
Note on the connection method	Crimp connection, cannot be disconnected
Type of signal transmission	Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121
Number	2 (CP, PP)
Rated voltage	30 V AC
Rated current	2 A
Coding	1500 Ω (between PE and PP)
	PP signal contact connected to cable
Temperature sensors (Pt 1000)
Sensor type	Pt 1000
Standards/regulations	DIN EN 60751
Attachment point	Sensor for the DC contacts
Switch-off temperature	90 °C ±1 K (equivalent to a Pt 1000 value of 1346.5 Ω)
Long-term stability	0.06 % (after 1000 hours at 130 °C)
Recommended measured current	1 mA (1 V at 0°C)
Coefficient	3850 ppm/K
Ambient temperature	-50 °C ... 130 °C (Operation)

Vehicle charging connector
Width	75 mm
Height	139 mm
Depth	267 mm

Color (Housing)	black (9005)
Color (Handle area)	gray (7042)
Color (Mating face)	black (9005)
Color (Protective cap)	black (9005)
Color (Cable)	black (9005)
Material (Vehicle charging connector)	Plastic
Material (Cable outer sheath)	TPE-U
Material (Contact surface)	Silver
Note	The color appearance and gloss level of the charging cable may vary.

Cable length	5.5 m ±45 mm
Wiring standards/regulations	prEN 50620/DIN EN 50620
Wiring certifications	VDE-Reg.
Cable weight	max. 1620.00 kg/km
Cable type	Class 6
Cable type	straight
Cable structure	2 x 50 mm² + 1 x 25 mm² + 3 x 2 x 0.75 mm²
External cable diameter	28.10 mm ±0.5 mm
Outer sheath, material	TPE-U
Stripping length of the sheath	140 mm ±10 mm
Stripping length	140 mm ±10 mm
Cable resistance	≤ 0.00039 Ω/m (based on a power core, at an ambient temperature of 20°C)
Bending radius	min. 281 mm (10x Ø)

Mechanical data
Insertion/withdrawal cycles	> 10000
Insertion force	< 100 N
Withdrawal force	< 100 N

Ambient conditions
Degree of protection (Vehicle charging connector)	IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Ambient temperature (operation)	-30 °C ... 40 °C
	max. 55 °C (Current reduction required, observe the DC contact temperature limit value of 90°C)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	5000 m (above sea level)

Connection in accordance with standard
Normative cable length restrictions	NOTE: The cable length exceeds the normative specification of 10 m.
	Interference-free V2G communication in accordance with ISO 15118 is not guaranteed for cable lengths over 10 m (ISO IEC 15118-3, A.11.3, Table A.11).
	Cable management is required in the US if the cable length exceeds 7.5 m (IEC 61851-1).
Standards/specifications	IEC 62196-3
Note	Compliant with AFIR - EU 2025/656
Note	Test voltage for insulation resistance measurement in accordance with IEC 62196-1:2022 between CP and PE/PP < 24 V

Item number	1665234
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	XA
Product key	XWBMFE
GTIN	4067923207523
Weight per piece (including packing)	11.294 g
Weight per piece (excluding packing)	9.900 g
Country of origin	Information on the country of origin is provided with the delivery.

Compatible products

Accessories

Your advantages

Complete product range

The right charging cable for every application, from the carport to the charging park

Convenient handling due to the ergonomic design

Available with your logo on request - for consistent branding of your charging station

Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001

ECLASS-13.0	27144705
ECLASS-15.0	27144705

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c)
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

EV-T2M4CC-DC200A-5,5M50CSBK11 - DC charging cable

1665234

Product details

ECLASS

ETIM

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

EV-T2M4CC-DC200A-5,5M50CSBK11 - DC charging cable 1665234

Product details

ECLASS

ETIM

Compatible products

EV-T2CCS-PARK - Charging connector holder 1624153

EV-PLCC-AC1-DC1 - DC charging controller 1624130

EV-T2CCS-MF-M4X45-BIT - Repair kit 1085796

EV-T2CCS-MF-M4X45 - Repair kit 1081734

G-INS-M50-L68L-PNES-BK - Cable gland 1411138

EV-LABEL-K - Label 1309761

EV-LABEL-L - Label 1309765

CHARX PS/3AC/920DC/87.5KW - DC power module 1162690

CHARX PS-M2/3AC/1000DC/30KW - DC power module 1232243

CHARX PS-M2/825DC/1000DC/30KW - DC power module 1296467

TW 95/ 1-CL - Panel feed-through terminal block 1708752

XPC 1,5/ 6-ST-3,5 BK - PCB connector 1464109

ES-BPC-C 50-70 BK - Connector 1155595

ES-BPC-C 50-70 OG - Connector 1155594

SPTD 1,5/ 6-H-3,5 - PCB terminal block 1841539

Your advantages

EV-T2M4CC-DC200A-5,5M50CSBK11 - DC charging cable

1665234