QUINT4-INV/24DC/1AC/600VA/USB - DC/AC inverter - 1067325

Input data

Input voltage	24 V DC
Input voltage range DC	20 V DC ... 30 V DC
Current consumption	typ. 23 A
	max. 28 A

Output data

Efficiency	> 86 % (120 V AC)
Efficiency		> 87 % (230 V AC)
Output voltage	120 V AC ±2 % (100 V AC / 6 A...130 V AC / 4,6 A)
Output voltage		230 V AC ±2 % (200 V AC / 3 A...240 V / 2,5 A)
Form of output voltage	Pure sine
Nominal output current (I_N)	5 A (120 V AC)
Nominal output current (I_N)		2.6 A (230 V AC)
Maximum no-load power dissipation	typ. 21 W (120 V AC)
Maximum no-load power dissipation		typ. 21 W (230 V AC)
Power loss nominal load max.	typ. 72 W (120 V AC)
Power loss nominal load max.		typ. 66 W (230 V AC)
Nominal output frequency	60 Hz 50 Hz ±0.5 %
Derating	50 °C ... 60 °C (2.5 %/K)
Apparent power	600 VA
Real power	480 W
Power factor (cos phi)	0.8
Crest factor	2.8
Total harmonic distortion factor (THD)	< 3 % (linear load)
Total harmonic distortion factor (THD)		< 8 % (non-linear load)
Connection in parallel	yes
Connection in parallel		max. 3
Connection in series	no
Overload capacity Mains operation	105 % (permanent)
Overload capacity Mains operation		120 % ... 150 % (20 s / 5 s, then shutdown)
Electronic current limitation	> 2,5 x I_N (> 200 ms)

Connection data

Input
Position	1.x
Conductor connection
Connection method	Screw connection
rigid	0.2 mm² ... 6 mm²
flexible	0.2 mm² ... 4 mm²
flexible with ferrule without plastic sleeve	0.2 mm² ... 4 mm²
flexible with ferrule with plastic sleeve	0.2 mm² ... 4 mm²
rigid (AWG)	30 ... 10
Stripping length	8 mm
Tightening torque	0.5 Nm ... 0.6 Nm
Drive form screw head	Slotted L
Output
Position	2.x
Conductor connection
Connection method	Screw connection
rigid	0.2 mm² ... 6 mm²
flexible	0.2 mm² ... 4 mm²
flexible with ferrule without plastic sleeve	0.2 mm² ... 4 mm²
flexible with ferrule with plastic sleeve	0.2 mm² ... 4 mm²
rigid (AWG)	30 ... 10
Stripping length	8 mm
Tightening torque	0.5 Nm ... 0.6 Nm
Drive form screw head	Slotted L
Signal
Position	3.x
Conductor connection
Connection method	Screw connection
rigid	0.2 mm² ... 1.5 mm²
flexible	0.2 mm² ... 1.5 mm²
flexible with ferrule without plastic sleeve	0.2 mm² ... 1.5 mm²
flexible with ferrule with plastic sleeve	0.2 mm² ... 1.5 mm²
rigid (AWG)	30 ... 12
Stripping length	8 mm
Tightening torque	0.5 Nm ... 0.6 Nm
Drive form screw head	Slotted L

Interfaces

Interface	USB (Modbus/RTU)
Number of interfaces	1
Connection method	MINI-USB Type B
Connection marking	5.1
Locking	Screw
Transmission physics	USB 2.0
Features	lockable
Maximum cable length	3 m
Electrical isolation	yes
Interface	Parallel Port
Number of interfaces	1
Connection method	RJ45
Connection marking	5.2
Locking	Locking clip
Electrical isolation	yes

Signaling

Signal input Start
Connection labeling	3.6
Signalization designation	Start 230V
Low signal	Connection to SGnd with < 2.7 kΩ
High signal	Open (> 200 kΩ between Start and SGnd)
Signal input Start
Connection labeling	3.7
Signalization designation	Start 120V
Low signal	Connection to SGnd with < 2.7 kΩ
High signal	Open (> 200 kΩ between Start and SGnd)
Signal input Remote
Connection labeling	3.8
Signalization designation	Remote
Low signal	Connection to SGnd with < 2.7 kΩ
High signal	Open (> 35 kΩ between Remote and SGnd)
Signal output AC OK
Connection labeling	3.2
Signalization designation	AC OK
Type of signaling	LED (green)
Switching output	Transistor output, active
Output voltage	24 V
Continuous load current	≤ 20 mA
LED status indicator	green
Signal output DC OK
Connection labeling	3.3
Signalization designation	DC OK
Switching output	Transistor output, active
Output voltage	24 V
Continuous load current	≤ 20 mA
LED status indicator	green
Signal output Alarm
Connection labeling	3.1
Signalization designation	Alarm
Type of signaling	LED red
Switching output	Transistor output, active
Output voltage	24 V
Continuous load current	≤ 20 mA
LED status indicator	red
Signal output P > P_N
Connection labeling	3.4
Signalization designation	P>P_n
Switching output	Transistor output, active
Continuous load current	≤ 20 mA
LED status indicator	green
Signal output Parallel run
Connection labeling	3.5
Signalization designation	Parallel run
Switching output	Transistor output, active
Continuous load current	≤ 20 mA
Signal ground SGnd
Connection labeling	3.9
Function	Signal ground
Reference potential	For signal inputs and signal outputs

Electrical properties

Number of phases	1

Product properties

Product type	DC/AC inverters
Product family	QUINT INVERTER
MTBF (IEC 61709, SN 29500)	532525 h (40 °C)
Insulation characteristics
Protection class	I
Degree of pollution	2

Dimensions

Item dimensions
Width	180 mm
Height	130 mm
Depth	125 mm
Installation dimensions
Installation distance right/left	0 mm / 0 mm
Installation distance top/bottom	50 mm / 50 mm

Mounting

Mounting type	DIN rail mounting

Material specifications

Housing material	Metal

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 60 °C (> 50 °C: 2,5 % / K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 3000 m (> 2000 m: 0,6 % / 100 m)
Max. permissible relative humidity (operation)	≤ 95 %
Shock	20g in all directions (EN 60068-2-27)
Vibration (operation)	5 Hz ... 100 Hz, 0.7g (EN 60068-2-6)

Standards and regulations

Overvoltage category
EN 61010-2-201	II

Approvals

UL
Identification	UL/C-UL Recognized UL 1778
UL
Identification	UL/C-UL Listed UL 61010-1
UL
Identification	UL/C-UL Listed UL 61010-2-201

EMC data

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Interference emission	Noise emission in accordance with EN 61000-6-4
Noise immunity	Immunity in accordance with EN 61000-6-2
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	± 6 kV
Discharge in air	± 8 kV
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 6 GHz
Test field strength	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	± 2 kV
Output	± 2 kV
Signal	± 2 kV
Signal		± 2 kV (USB)
Comments	Criterion A (B for USB)
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Surge voltage load (surge)
Input	± 1 kV (symmetrical)
Input		± 2 kV (asymmetrical)
Output	± 2 kV (symmetrical)
Output		± 4 kV (asymmetrical)
Signal	1 kV (asymmetrical)
Comments	Criterion A
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz
Signal	10 V
Comments	Criterion A
Power frequency magnetic field
Standards/regulations	EN 61000-4-8
Frequency	50 Hz
Frequency		60 Hz
Signal	30 A/m
Comments	Criterion A
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.

Item number	1067325
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	H1 - Power supply units
Product key	CMII45
GTIN	4055626737003
Weight per piece (including packing)	2.834 g
Weight per piece (excluding packing)	2.525 g
Customs tariff number	85044085
Country of origin	DE

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c)
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	0ca010f8-3c23-4d21-b5d9-0cb3d1a696c5

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

QUINT4-INV/24DC/1AC/600VA/USB - DC/AC inverter

1067325

Product details

ECLASS

ETIM

UNSPSC

IECEE CB Scheme

cULus Recognized

cULus Recognized

EAC

cUL Recognized

UL Recognized

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

QUINT4-INV/24DC/1AC/600VA/USB - DC/AC inverter 1067325

Product details

ECLASS

ETIM

UNSPSC

Compatible products

RJ45-PORT-BRIDGE/3XPARALLEL - Adapter 1205351

MINI-SCREW-USB-DATACABLE - Data cable 2908217

UWA 130 - Mounting adapter 2901664

UWA 182/52 - Mounting adapter 2938235

PLT-SEC-T3-120-FM-UT - Type 3 surge protection device 2907918

PLT-SEC-T3-230-FM-UT - Type 3 surge protection device 2907919

POWER MANAGEMENT SUITE - Configuration software 1252232

Your advantages

QUINT4-INV/24DC/1AC/600VA/USB - DC/AC inverter

1067325