NLC-035-024D-04I-02QRD-05A
-
Base unit
2702031
24 V DC Nanoline base unit. Equipped with 4 digital input and 2 relay output channels. Two inputs may be configured as analog inputs and two may be configured as high-speed counters. Accepts one additional expansion unit. Onboard RJ11 connector provides programming, serial connectivity and communication to remote operator panel. Programming is via nanoNavigator.
Product details
| Product family | Nanoline |
| INTERBUS-Master | |
| Number of supported branch terminals with remote bus branch | 1 (I/O modules) |
| System requirements | |
| Engineering tool | nanoNavigator 4.2 or above |
| Supply | |
| Supply voltage | 24 V DC (Power available to the I/O and Communications modules) |
| Supply voltage range | 19.2 V DC ... 30 V DC |
| Power supply connection | Screw connection |
| Max. current consumption | 81 mA |
| Typical current consumption | 74 mA |
| Analog: | |
| Description of the input | Analog input |
| Number of inputs | 2 (configurable) |
| Connection technology | Screw connection |
| Current input signal | 0 mA ... 20 mA |
| 4 mA ... 20 mA | |
| Input resistance current input | 500 Ω |
| Voltage input signal | 0 V DC ... 10 V DC |
| Input resistance of voltage input | 200 kΩ |
| A/D converter resolution | 10 bit |
| Input filter | digital |
| Limit frequency (3 dB) | 0.5 Hz (3 dB) |
| Measuring principle | Successive approximation |
| Protective circuit | Polarity reversal |
| Digital: | |
| Input name | Digital inputs |
| Description of the input | PNP |
| Number of inputs | 4 |
| Connection method | Screw connection |
| Input voltage range "0" signal | 0 V DC ... 5 V DC |
| Input voltage range "1" signal | 11 V DC ... 30 V DC |
| Nominal input current at UIN | 1.2 mA (Channel 1 and 2) |
| 0.13 mA (Channel 3 and 4) | |
| Typical response time | 10 µs (Channel 1 and 2) |
| 2 ms (Channel 3 and 4) | |
| Counter: | |
| Description of the input | High-speed counter |
| Number of inputs | 2 (configurable) |
| Input frequency | 10 kHz |
| Digital: | |
| Output name | Relay output |
| Output description | Relay output |
| Connection method | Screw connection |
| Number of outputs | 2 |
| Maximum output current per channel | 5 A |
| Maximum output current per module / terminal block | 10 A |
| Maximum output current per module | 10 A |
| Connection method | Screw connection |
| Operator Panel | |
| Connection method | RJ45 / COMBICON |
| RS-232 | |
| Connection method | Slot 1 |
| USB | |
| Connection method | Slot 1 |
| Dimensional drawing |
|
| Width | 40 mm |
| Height | 103.5 mm |
| Depth | 43 mm |
| Color | white |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C ... 70 °C |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 90 % |
| Permissible humidity (storage/transport) | 90 % |
| Mounting type | DIN rail mounting |
