Application Center for efficient processes in control cabinet building

Experience efficient solutions live in our Application Center.

Application Center Landsberg am Lech, Germany

Exterior view of IndustrialMakerSpace in Landsberg am Lech, Germany

Welcome to Landsberg am Lech!

Our Application Center is the central point of contact for innovative solutions for all aspects of control cabinet building. In a modern co-working environment, the IndustrialMakerSpace®, we offer everything that control cabinet builders and machine builders need: From engineering and project planning to mechanical processing, assembly, marking, and final assembly, right through to service and maintenance.

We will show you possible production processes on real products and will also be happy to do this on the basis of your real projects. When it comes to optimizing production processes, we not only advise you, but also work with you to develop solutions for your requirements. Benefit from our expertise and experience. The Application Center is your starting point for partnership-based, practical, and future-oriented solutions in control cabinet building. We look forward to your visit.

What is the Control Cabinet Building Application Center?

Book your appointment at the Application Center now

We invite you and your team to an intensive exchange. Our goal: to sustainably increase your efficiency.
We focus on you and your individual challenges.
Test and experience all solutions for yourself. From design and data provision to the individual production steps.
We not only advise. We accompany you on your way to individual solutions for your requirements.

People in a meeting room in the Application Center

Typical agenda

Your team can expect to spend around four hours in the Application Center. The appointment is tailored to your applications and individual challenges in control cabinet building.

Kickoff
We start with a brief introduction. We clarify your expectations and specific questions.
Scope
Together, we look at all process steps in control cabinet building. We check which optimizations match your strategic direction, your design and production processes, and our range of services - in the Application Center and also later on your premises.
Practical phase
Now we roll up our sleeves: In our Experience area, you have the opportunity to test all the solutions in our production line. Experience production-oriented engineering as well as digital and efficient manufacturing processes in control cabinet building.
Next steps
Finally, we discuss how the methods and solutions you have experienced can be integrated into your processes.

What next? Your visit to the Application Center is the starting point for more efficiency in your control cabinet building. We define the next steps together and support you during implementation.

The most important facts about the Application Center at a glance

Employees in the control cabinet building Application Center

Phoenix Contact employees talking to a customer with a view of the control cabinet production line

Four Phoenix Contact employees at the Application Center in Landsberg, Germany

Target group

Experience shows that you should ideally visit us as a team. This means that all requirements and perspectives are represented. This increases mutual understanding and acceptance. Typically, you visit us with two to four people from these areas:

Group Executive Board
Workshop and production management
Design management and designers
Employees from production

Our offer is aimed in particular at control cabinet and machine building companies. At the same time, all other sectors are also welcome to come and scrutinize their processes together or get to know our solutions.

Our offer in the Application Center

In addition to individual consulting and testing of our solutions, we offer practical training and workshops.

Testing and trialing processes on a real control cabinet unit
Consulting and development of engineering and production systems with a “Digital Twin”
Use of our planning and marking software, automatic tools and printing systems, also at the interfaces to an ECAD system
Joint evaluation of different levels of automation for your company
Training courses and workshops on our marking systems and automatic tools
Lean workshops to increase efficiency, reduce errors, and promote employee development

Our offer at your company

We also offer almost all of the Application Center's consulting and support services directly on your premises. Our experienced experts support you from the development of ideas, through workshops, right through to the implementation of solutions in your processes. Further information on process optimization measures and training can be found via the following link:

More about process consulting

Organizational information

Making an appointment
Visits are only possible by prior appointment.
Your personal contact person:
Frank Haugk (Head of Application Center)

Tel.: +49 151 16202718
Email: frank.haugk@phoenixcontact.de

Address
IndustrialMakerSpace
Am Penzinger Feld 15
86899 Landsberg am Lech
Germany

Our experts

From planning to implementation: we will support you in the efficient design of your control cabinet building. Our team will accompany you every step of the way with many years of experience and expertise:

Functional engineering in ECAD
Lean measures such as digital factory planning and shopfloor management
Ergonomic workstation design
Integration into your processes, also in cooperation with your suppliers and external manufacturing partners

This allows you to optimize your processes and increase efficiency in production.

Your personal contact person

For all questions about the Application Center

Frank Haugk

Head of Application Center

+49 151 16202718 frank.haugk@phoenixcontact.de

The Application Center is your starting point for practical and future-oriented solutions in control cabinet building. We look forward to your visit.

Impressions

People working at the various stations in the Application Center

Employees at an engineering workstation in the Application Center

Workstation with various printing systems for industrial identification

Workstation for wire preparation with marking systems and automatic tools

Two people working at the mounting and wiring workstation in the Application Center

Three people building a workstation as part of a cardboard engineering training course

Man drawing a sketch of a workstation on a flipchart

People in the Process optimization in control cabinet building seminar

You too can become a professional for process optimization in control cabinet building

Our expert training is aimed specifically at employees in control cabinet building who want to make work processes more efficient and reduce costs - from beginners to experienced professionals. In practical training sessions, you will learn proven methods and concepts to sustainably improve processes and make your control cabinet building fit for the future. The seminar is divided into three modules.

Take this opportunity to raise your production to a new level of efficiency.

To the expert training seminar

Shaping processes together

Process optimization along the value chain

From engineering to production – our partnership approach provides you with custom consulting services to optimize your process chain in control cabinet building, based on practical lean production methods. The consulting services are based on years of experience with the methods and include a comprehensive range of consulting activities and training programs for employees.

Find out more