Adapters and couplings provide a high degree of flexibility when adapting the cabling. DIN rail adapters ensure the secure connection of your cables and the reliable transmission of data. Use M8, M12, and valve connector adapters in the field. Use termination resistors to reliably prevent signal reflections at the end of the bus line in fieldbus systems.
Patch panel, SC-RJ, DIN rail mounting, IP20, 1 slot, socket/socket, can be used for glass, multi-mode, PCF, and polymer fibers
Adapter, 4-position, Plug straight M12, coding: A, on Socket straight M8, coding: A
Adapter, 3-position, Plug straight M8, coding: A, on Socket straight M12, coding: A
V.24 (RS-232) zero modem connector
Coupling; set consisting of 2 couplings for connecting F-SMA plugs
PROFIBUS M12 termination resistor, female connector version
SC-RJ socket insert, duplex, for VS-A-F-IP67 panel mounting frame, can be used for fiberglass (multi-mode and single mode), PCF, and polymer fibers
CC-Link termination resistor, 4-pos., M12 plug
Valve connector, 3-position, Plug straight M12 SPEEDCON, coding: A, on Valve connector A, with 1 LED, Wiring: Z diode
Valve connector, 3-position, Plug angled M12, coding: A, on Valve connector B (10 mm), with 1 LED, Wiring: Z diode
![19" distributors and DIN rail adapters](https://caas.phoenixcontact.com/caas/v1/stable/media/76308/full/b700?format=jpg "19" distributors and DIN rail adapters")
The 19" distributors and DIN rail adapters for FO and copper-based data cabling extend our portfolio of adapters. You will find these products grouped by data connectors.
Wall-mounted junction boxes, called terminal outlets, are used to connect an end device to cabling. The junction boxes can also be found in the product list on this page.
