QUINT-DC-UPS/24DC/10
-
Uninterruptible power supply
2866226
Uninterruptible power supply 24 V DC/10 A, with integrated 1.3 Ah battery module. In the download area, there is a clearly arranged selection table available with load currents and buffer times, as well as charging times after buffer mode.
Product details
DC operation | |
Input voltage | 24 V DC |
Input voltage range | 22.5 V DC ... 30 V DC |
Wide-range input | no |
Input voltage range DC | 22.5 V DC ... 30 V DC |
Voltage type of supply voltage | DC |
Buffer period | 1.5 min (10 A) |
20 min (2 A) | |
Current consumption | approx. 0.1 A |
0.5 A (charging process) | |
10.5 A (max.) | |
Fixed backup threshold | < 22 V DC |
Variable connect threshold | (UIN - 1 V)/0.1 s |
Input fuse | 15 A (slow-blow, internal) |
Efficiency | > 91 % |
Nominal output voltage | 24 V DC (Normal operation: Uin- 0.5 V DC, buffer mode: 27.9 to 19.2 V DC) |
Nominal output current (IN) | 10 A |
Bridging time | 2 min |
Short-circuit-proof | yes |
Output power | 240 W |
Power dissipation | 20 W |
8 W | |
Connection in parallel | no |
Connection in series | yes |
Mains operation | |
Nominal output voltage | 24 V DC |
Nominal output current (IN) | 10 A |
Battery operation | |
Nominal output voltage | 24 V DC |
Nominal output current (IN) | 10 A |
Signal | |
Output description | Power OK |
Signal: floating | |
Output description | Alarm |
Maximum switching voltage | ≤ 30 V AC/DC |
Continuous load current | ≤ 1 A |
Signal: floating | |
Output description | Battery Charge |
Maximum switching voltage | ≤ 30 V AC/DC |
Continuous load current | ≤ 1 A |
Signal: floating | |
Output description | Battery Mode |
Maximum switching voltage | ≤ 30 V AC/DC |
Continuous load current | ≤ 1 A |
Nominal capacity | 1.3 Ah |
Battery module service life | 6 Years (20 °C) |
Latest startup date (battery only) | 9 Months (20 °C ... 30 °C) |
6 Months (30 °C ... 40 °C) | |
Memory medium | internal, battery 1.3 Ah |
Network management | Yes |
Input | |
Connection method | Pluggable screw connection |
Conductor cross section, rigid min. | 0.2 mm² |
Conductor cross section, rigid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Stripping length | 7 mm |
Screw thread | M3 |
Output | |
Connection method | Pluggable screw connection |
Conductor cross section, rigid min. | 0.2 mm² |
Conductor cross section, rigid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Stripping length | 7 mm |
Screw thread | M3 |
Signal | |
Conductor cross section, rigid min. | 0.2 mm² |
Conductor cross section, rigid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Screw thread | M3 |
Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm |
Types of signaling | LED |
Operating voltage display | Green LED |
Signal output | |
Status display | LED "Power OK" green |
Note on status display | Power OK: LED permanently lit |
Signal output: floating | |
Status display | LED (red) |
Note on status display | Alarm: LED permanently lit |
Signal output: floating | |
Status display | LED flashing yellow |
Note on status display | Battery charge: LED flashing |
Signal output: floating | |
Status display | LED (yellow) |
Note on status display | Battery mode: LED permanently lit |
Insulation voltage input/output | 2 kV (routine test) |
4 kV (type test) |
Product type | DC UPS |
Disposal | Used batteries must not be thrown away with household waste, they should instead be disposed of in accordance with applicable national regulations. |
MTBF (IEC 61709, SN 29500) | > 500000 h |
Insulation characteristics | |
Protection class | II (in closed control cabinet) |
Width | 100 mm |
Height | 130 mm |
Depth | 125 mm |
Installation dimensions | |
Installation distance right/left | 5 mm / 5 mm |
Installation distance top/bottom | 50 mm / 50 mm |
Mounting type | DIN rail mounting |
Assembly note | alignable: horizontally 0 mm, vertically 50 mm |
Mounting position | horizontal DIN rail NS 35, EN 60715 |
Housing material | Metal |
Type of housing | AluNox (AlMg1) |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | 0 °C ... 50 °C |
Ambient temperature (storage/transport) | 0 °C ... 40 °C |
Max. permissible relative humidity (operation) | 95 % (at 25 °C, non-condensing) |
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
Standard - Electrical safety | EN 60950-1/VDE 0805 (SELV) |
EN 61558-2-17 | |
Standard - Safe isolation | DIN VDE 0100-410 |
Standard - Safety of transformers | EN 61558-2-17 |
Shipbuilding approval | DNV GL (EMC A), ABS |
UL approvals | UL/C-UL listed UL 508 |
UL/C-UL Recognized UL 60950-1 | |
UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D | |
Conformity/Approvals | |
SIL in accordance with IEC 61508 | 0 |
Performance level according to ISO 13849 | without |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
Noise immunity | EN 61000-6-2:2005 |
Noise emission | |
Standards/regulations | EN 55011 (EN 55022) |
Item number | 2866226 |
Packing unit | 1 pc |
Minimum order quantity | 1 pc |
Note | Made to order (non-returnable) |
Sales key | CMU |
Product key | CMUPV3 |
Catalog page | Page 587 (IF-2009) |
GTIN | 4017918959722 |
Weight per piece (including packing) | 1,908 g |
Weight per piece (excluding packing) | 1,800 g |
Customs tariff number | 85044082 |
Country of origin | CN |
UNSPSC
UNSPSC 21.0 | 39121011 |
Compatible products
Phoenix Contact UAB
Svitrigailos str. 11M, 03228 Vilnius