EMG 30-SPK-10K LIN
-
Setpoint adjuster
2942137
Cascading setpoint value potentiometer, for selecting presettable setpoints via a 24 V control signal, resistance value 10 kΩ
Product details
| Product type | Setpoint potentiometer |
| Test voltage relay winding/relay contact | 1 kV AC |
| Coil side | |
| Nominal input voltage UN | 24 V ±25 % |
| Typical response time | < 10 ms |
| Typical release time | < 10 ms |
| Protective circuit | Damping diode, polarity protection diode |
| Operating voltage display | yes |
| Potentiometer | |
| Potentiometer, resistance value | 10 kΩ ±20 % |
| Linearity | 5 % (of final value) |
| Potentiometer, current-carrying capacity | 0.5 W |
| Switching: | |
| Contact material | Fixed contacts: Silver palladium (AgPdAu), 3 µm hard gold-plated |
| Mobile contacts: Silver palladium (AgPd) | |
| Maximum switching voltage | 10 V (depending on application) |
| Mechanical service life | > 2x 107 cycles |
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Dimensional drawing |
|
| Width | 30 mm |
| Height | 75 mm |
| Depth | 68 mm |
| Color | green (RAL 6021) |
| Housing material | Polycarbonate fiber reinforced PC-F |
| Ambient conditions | |
| Ambient temperature (operation) | 0 °C ... 40 °C |
| Mounting type | DIN rail mounting |
| Mounting position | any |