PTIO 1,5/S/3-L-R1K8/O-M - Initiator/actuator terminal block

1349534

Initiator/actuator terminal block, with 1.8 kΩ resistance, nom. voltage: 24 V, nominal current: 13.5 A, number of connections: 4, connection method: Push-in connection, Rated cross section: 1.5 mm², cross section: 0.14 mm² - 1.5 mm², mounting type: NS 35/7,5, NS 35/15, color: gray

Product details

Product type	Sensor/actuator terminal block
Number of connections	4
Number of rows	2
Potentials	3
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Rated surge voltage	4 kV
Maximum power dissipation for nominal condition	0.4 W

Number of connections per level	2
Nominal cross section	1.5 mm²
Stripping length	8 mm ... 10 mm
Internal cylindrical gage	A1 / B1
Connection in acc. with standard	IEC 60947-7-1
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Cross section AWG	26 ... 16 (converted acc. to IEC)
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section, flexible [AWG]	26 ... 16 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)	0.14 mm² ... 1.5 mm²
Flexible conductor cross section (ferrule with plastic sleeve)	0.14 mm² ... 1.5 mm²
Nominal current	13.5 A
Maximum load current	13.5 A (with 1.5 mm² conductor cross section)
Nominal voltage	24 V
Nominal cross section	1.5 mm²
Connection cross sections directly pluggable
Conductor cross section rigid	0.25 mm² ... 1.5 mm²
Conductor cross-section flexible (ferrule without plastic sleeve)	0.34 mm² ... 1.5 mm²
Flexible conductor cross section (ferrule with plastic sleeve)	0.34 mm² ... 1 mm²

Width	3.5 mm
End cover width	2.2 mm
Height	74.4 mm
Depth on NS 35/7,5	41.5 mm
Depth on NS 35/15	49 mm

Color	gray (RAL 7042)
Flammability rating according to UL 94	V0
Insulating material group	I
Insulating material	PA
Static insulating material application in cold	-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))	125 °C
Relative insulation material temperature index (Elec., UL 746 B)	130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26	HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)	27,5 MJ/kg
Surface flammability NFPA 130 (ASTM E 162)	passed
Specific optical density of smoke NFPA 130 (ASTM E 662)	passed
Smoke gas toxicity NFPA 130 (SMP 800C)	passed

Result	Test passed

Mechanical data
Open side panel	Yes

Mechanical strength
Result	Test passed
Attachment on the carrier
DIN rail/fixing support	NS 35
Test force setpoint	1 N
Result	Test passed
Test for conductor damage and slackening
Conductor cross section/weight	0.14 mm² / 0.2 kg
	1.5 mm² / 0.4 kg
Result	Test passed

Aging
Temperature cycles	192
Result	Test passed
Needle-flame test
Time of exposure	30 s
Result	Test passed
Oscillation/broadband noise
Specification	DIN EN 50155 (VDE 0115-200):2018-05
Spectrum	Long life test category 2, bogie-mounted
Frequency	f₁ = 5 Hz to f₂ = 250 Hz
ASD level	6.12 (m/s²)²/Hz
Acceleration	3.12g
Test duration per axis	5 h
Test directions	X-, Y- and Z-axis
Result	Test passed
Shocks
Specification	DIN EN 50155 (VDE 0115-200):2018-05
Pulse shape	Half-sine
Acceleration	30g
Shock duration	18 ms
Number of shocks per direction	3
Test directions	X-, Y- and Z-axis (pos. and neg.)
Result	Test passed
Ambient conditions
Ambient temperature (operation)	-60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.)
Ambient temperature (storage/transport)	-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)	-5 °C ... 70 °C
Ambient temperature (actuation)	-5 °C ... 70 °C
Permissible humidity (operation)	20 % ... 90 %
Permissible humidity (storage/transport)	30 % ... 70 %

Connection in acc. with standard	IEC 60947-7-1

Mounting type	NS 35/7,5
	NS 35/15

Commercial data

Item number	1349534
Packing unit	50 pc
Minimum order quantity	50 pc
Sales key	BE2
Product key	BE2217
GTIN	4063151668327
Weight per piece (including packing)	7.18 g
Weight per piece (excluding packing)	7.18 g
Customs tariff number	85369010
Country of origin	PL

Classifications

Approvals

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
Use group C
	50 V	15 A	26 - 14

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
Use group C
	50 V	15 A	26 - 14

Environmental product compliance

Compatible products

Accessories

Your advantages

Three-conductor output terminal block of the same shape with PE connection in the lower level for wiring actuators

Power terminal blocks can be located at any point on the terminal strip for supply or extension purposes

Versions with LED for indicating the switching states

Easy bridging and potential distribution using the patented plug-in bridges from the CLIPLINE complete system

Potential supply is via the PTIO-IN feed-in terminal blocks

For space and time-saving wiring of three-conductor initiators and actuators

The upper level is for signal wiring, whereas the two lower levels are used to distribute the positive and negative potential

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
China RoHS
Environment friendly use period (EFUP)	EFUP-E No hazardous substances above the limits
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PTIO 1,5/S/3-L-R1K8/O-M - Initiator/actuator terminal block

1349534

Product details

ECLASS

ETIM

UNSPSC

CSA

cULus Recognized

EAC

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PTIO 1,5/S/3-L-R1K8/O-M - Initiator/actuator terminal block 1349534

Product details

ECLASS

ETIM

UNSPSC

Compatible products

FBS 2-3,5 - Plug-in bridge 3213014

FBS 3-3,5 - Plug-in bridge 3213027

FBS 4-3,5 - Plug-in bridge 3213030

FBS 5-3,5 - Plug-in bridge 3213043

FBS 10-3,5 - Plug-in bridge 3213056

FBS 20-3,5 - Plug-in bridge 3213069

FBS 50-3,5 - Plug-in bridge 3000706

FBS 2-3,5 BU - Plug-in bridge 3213086

FBS 3-3,5 BU - Plug-in bridge 3213099

FBS 4-3,5 BU - Plug-in bridge 3213109

FBS 5-3,5 BU - Plug-in bridge 3213112

FBS 10-3,5 BU - Plug-in bridge 3213125

FBS 20-3,5 BU - Plug-in bridge 3213138

FBS 50-3,5 BU - Plug-in bridge 3000708

FBS 2-3,5 GY - Plug-in bridge 3213153

FBS 3-3,5 GY - Plug-in bridge 3213167

FBS 4-3,5 GY - Plug-in bridge 3213180

FBS 5-3,5 GY - Plug-in bridge 3213183

FBS 10-3,5 GY - Plug-in bridge 3213196

FBS 20-3,5 GY - Plug-in bridge 3213206

FBS 50-3,5 GY - Plug-in bridge 3000707

D-PTIO 1,5/S/3 - End cover 3244575

UCTU-TM (3,5X7) - Marker for terminal blocks 0803666

AI-S 1 - 8 TQ - Ferrule 1200293

NS 35/ 7,5 PERF 2000MM - DIN rail perforated 0801733

NS 35/ 7,5 UNPERF 2000MM - DIN rail, unperforated 0801681

NS 35/ 7,5 WH PERF 2000MM - DIN rail perforated 1204119

NS 35/ 7,5 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204122

NS 35/ 7,5 AL UNPERF 2000MM - DIN rail, unperforated 0801704

NS 35/ 7,5 ZN PERF 2000MM - DIN rail perforated 1206421

NS 35/ 7,5 ZN UNPERF 2000MM - DIN rail, unperforated 1206434

NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 0801762

NS 35/ 7,5 CAP - End cap 1206560

NS 35/15 PERF 2000MM - DIN rail perforated 1201730

NS 35/15 UNPERF 2000MM - DIN rail, unperforated 1201714

NS 35/15 WH PERF 2000MM - DIN rail perforated 0806602

NS 35/15 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204135

NS 35/15 AL UNPERF 2000MM - DIN rail, unperforated 1201756

NS 35/15 ZN PERF 2000MM - DIN rail perforated 1206599

NS 35/15 ZN UNPERF 2000MM - DIN rail, unperforated 1206586

NS 35/15 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201895

NS 35/15 CAP - End cap 1206573

NS 35/15-2,3 UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201798

MPS-MT - Test plug 0201744

MPS-IH WH - Insulating sleeve 0201663

MPS-IH RD - Insulating sleeve 0201676

MPS-IH BU - Insulating sleeve 0201689

MPS-IH YE - Insulating sleeve 0201692

MPS-IH GN - Insulating sleeve 0201702

MPS-IH GY - Insulating sleeve 0201728

MPS-IH BK - Insulating sleeve 0201731

PS-3,5 - Test plug 3031010

DP PS-3,5 - Spacer plate 3031011

PS-3,5/E - Test plug 3031012

ST-BW 0 - Actuation tool 1200135

PROJECT COMPLETE - Software 1050453

CRIMPFOX CENTRUS 6S - Crimping pliers 1213144

CRIMPFOX CENTRUS 10S - Crimping pliers 1213154

CRIMPFOX CENTRUS 6H - Crimping pliers 1213146

CRIMPFOX CENTRUS 10H - Crimping pliers 1213156

CRIMPFOX 10S - Crimping pliers 1212045

CRIMPFOX 6H - Crimping pliers 1212046

CRIMPFOX 2,5-M - Crimping pliers 1212719

CRIMPFOX 6-M - Crimping pliers 1212720

CRIMPFOX 6 - Crimping pliers 1212034

CRIMPFOX 6T - Crimping pliers 1212037

CRIMPFOX 6T-F - Crimping pliers 1212038

CRIMPFOX 6S-F - Crimping pliers 1212043

CRIMPFOX-M - Crimping pliers 1212072

PTIO 1,5/S/3-L-R1K8/O-M - Initiator/actuator terminal block

1349534