PTS 1,5/S-TWIN/1P - Feed-through terminal block - 3214709

Product details

General	The max. load current must not be exceeded by the total current of all connected conductors. Current and voltage are determined by the plug used.

Product type	Plug-in terminal block
Product family	PTS
Number of positions	1
Number of connections	3
Number of rows	1
Potentials	1
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Rated surge voltage	6 kV
Maximum power dissipation for nominal condition	0.56 W

Number of connections per level	3
Nominal cross section	1.5 mm²
1 level
Connection method	Push-in / plug connection
Stripping length	8 mm ... 10 mm
Internal cylindrical gage	A1 / B1
Connection in acc. with standard	IEC 61984
Conductor cross-section rigid	0.14 mm² ... 1.5 mm²
Cross section AWG	26 ... 16 (converted acc. to IEC)
Conductor cross-section flexible	0.14 mm² ... 1.5 mm²
Conductor cross-section, flexible [AWG]	26 ... 16 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)	0.14 mm² ... 1.5 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)	0.14 mm² ... 1 mm² (Using the AI-S 1-8 TQ ferrule, Item No. 1200293, is recommended)
Nominal current	17.5 A (observe derating)
Maximum load current	17.5 A (with 1.5 mm² conductor cross-section)
Nominal voltage	500 V
Nominal cross section	1.5 mm²
1 level Connection cross sections directly pluggable
Conductor cross-section rigid	0.25 mm² ... 1.5 mm²
Conductor cross-section flexible (ferrule without plastic sleeve)	0.34 mm² ... 1.5 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)	0.34 mm² ... 1 mm²

Width	3.5 mm
End cover width	2.2 mm
Height	50.7 mm
Depth	37 mm
Depth on NS 35/7,5	38.5 mm
Depth on NS 35/15	46 mm

Color	gray (RAL 7042)
Flammability rating according to UL 94	V0
Insulating material group	I
Insulating material	PA
Static insulating material application in cold	-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))	130 °C
Relative insulation material temperature index (Elec., UL 746 B)	130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26	HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)	28 MJ/kg
Surface flammability NFPA 130 (ASTM E 162)	passed
Specific optical density of smoke NFPA 130 (ASTM E 662)	passed
Smoke gas toxicity NFPA 130 (SMP 800C)	passed

Surge voltage test
Test voltage setpoint	7.3 kV
Result	Test passed
Short-time withstand current 1.5 mm²	0.18 kA
Result	Test passed

Mechanical data
Open side panel	Yes

Attachment on the carrier
DIN rail/fixing support	NS 35
Test force setpoint	1 N
Result	Test passed

Needle-flame test
Time of exposure	30 s
Result	Test passed
Oscillation/broadband noise
Specification	DIN EN 50155 (VDE 0115-200):2008-03
Spectrum	Long life test category 1, class B, body mounted
Frequency	f₁ = 5 Hz to f₂ = 150 Hz
ASD level	1.857 (m/s²)²/Hz
Acceleration	0.8g
Test duration per axis	5 h
Test directions	X-, Y- and Z-axis
Result	Test passed
Shocks
Specification	DIN EN 50155 (VDE 0115-200):2008-03
Pulse shape	Half-sine
Acceleration	5g
Shock duration	30 ms
Number of shocks per direction	3
Test directions	X-, Y- and Z-axis (pos. and neg.)
Result	Test passed
Ambient conditions
Ambient temperature (operation)	-60 °C ... 100 °C (max. operating temperature range including self-heating, see derating curve)
Ambient temperature (storage/transport)	-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)	-5 °C ... 70 °C
Ambient temperature (actuation)	-5 °C ... 70 °C
Permissible humidity (operation)	20 % ... 90 %
Permissible humidity (storage/transport)	30 % ... 70 %

Connection in acc. with standard	IEC 61984

Mounting type	NS 35/7,5
	NS 35/15

Commercial data

Item number	3214709
Packing unit	50 pc
Minimum order quantity	50 pc
Sales key	BE2
Product key	BE2241
GTIN	4046356625425
Weight per piece (including packing)	4.302 g
Weight per piece (excluding packing)	4.12 g
Country of origin	PL

Classifications

Approvals

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG
B
	300 V	15 A	26 - 14
C
	300 V	15 A	26 - 14
D
	600 V	5 A	26 - 14

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
keine
	500 V

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG
B
	300 V	15 A	26 - 14
C
	300 V	15 A	26 - 14
D
	600 V	5 A	26 - 14

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
keine
	500 V

Environmental product compliance

ECLASS-13.0	27250117
ECLASS-15.0	27250117

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
China RoHS
Environment friendly use period (EFUP)	EFUP-E No hazardous substances above the limits
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PTS 1,5/S-TWIN/1P - Feed-through terminal block

3214709

Product details

ECLASS

ETIM

UNSPSC

DNV

CSA

IECEE CB Scheme

EAC

cULus Recognized

NK

BV

VDE Gutachten mit Fertigungsüberwachung

EAC

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PTS 1,5/S-TWIN/1P - Feed-through terminal block 3214709

Product details

ECLASS

ETIM

UNSPSC

Compatible products

FBS 3-3,5 BU - Plug-in bridge 3213099

FBS 4-3,5 BU - Plug-in bridge 3213109

FBS 5-3,5 BU - Plug-in bridge 3213112

FBS 10-3,5 BU - Plug-in bridge 3213125

FBS 20-3,5 BU - Plug-in bridge 3213138

FBS 2-3,5 - Plug-in bridge 3213014

FBS 3-3,5 - Plug-in bridge 3213027

FBS 4-3,5 - Plug-in bridge 3213030

FBS 5-3,5 - Plug-in bridge 3213043

FBS 10-3,5 - Plug-in bridge 3213056

FBS 20-3,5 - Plug-in bridge 3213069

FBS 2-3,5 GY - Plug-in bridge 3213153

FBS 2-3,5 BU - Plug-in bridge 3213086

FBS 3-3,5 GY - Plug-in bridge 3213167

FBS 4-3,5 GY - Plug-in bridge 3213180

FBS 5-3,5 GY - Plug-in bridge 3213183

FBS 10-3,5 GY - Plug-in bridge 3213196

FBS 20-3,5 GY - Plug-in bridge 3213206

FBS 50-3,5 - Plug-in bridge 3000706

FBS 50-3,5 BU - Plug-in bridge 3000708

FBS 50-3,5 GY - Plug-in bridge 3000707

GBS-ZB/26X6 - Group marker label for terminal marking 0809298

ATP-ST 4 - Partition plate 3030721

D-PTS 1,5/S - End cover 3214576

PC - Coding star 3040588

AI-S 1 - 8 TQ - Ferrule 1200293

NS 35/ 7,5 PERF 2000MM - DIN rail perforated 0801733

NS 35/ 7,5 UNPERF 2000MM - DIN rail, unperforated 0801681

NS 35/ 7,5 WH PERF 2000MM - DIN rail perforated 1204119

NS 35/ 7,5 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204122

NS 35/ 7,5 AL UNPERF 2000MM - DIN rail, unperforated 0801704

NS 35/ 7,5 ZN PERF 2000MM - DIN rail perforated 1206421

NS 35/ 7,5 ZN UNPERF 2000MM - DIN rail, unperforated 1206434

NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 0801762

NS 35/ 7,5 CAP - End cap 1206560

NS 35/15 PERF 2000MM - DIN rail perforated 1201730

NS 35/15 UNPERF 2000MM - DIN rail, unperforated 1201714

NS 35/15 WH PERF 2000MM - DIN rail perforated 0806602

NS 35/15 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204135

NS 35/15 AL UNPERF 2000MM - DIN rail, unperforated 1201756

NS 35/15 ZN PERF 2000MM - DIN rail perforated 1206599

NS 35/15 ZN UNPERF 2000MM - DIN rail, unperforated 1206586

NS 35/15 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201895

NS 35/15 CAP - End cap 1206573

NS 35/15-2,3 UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201798

ZB 3,5:UNBEDRUCKT - Zack marker strip 0829414

ZB 3,5 CUS - Zack marker strip 0829415

ZB 3,5,LGS:FORTL.ZAHLEN - Zack marker strip 0801404

ZB 3,5,QR:FORT.ZAHLEN - Zack marker strip 0801405

UCT-TM 3,5 - Marker for terminal blocks 0829484

UCT-TM 3,5 CUS - Marker for terminal blocks 0829581

GBS 3,5-25X3,5 - Group marker label for terminal marking 0830290

GBS 3,5-25X12 - Group marker label for terminal marking 0830292

MPS-MT - Test plug 0201744

MPS-IH WH - Insulating sleeve 0201663

MPS-IH RD - Insulating sleeve 0201676

MPS-IH BU - Insulating sleeve 0201689

MPS-IH YE - Insulating sleeve 0201692

MPS-IH GN - Insulating sleeve 0201702

MPS-IH GY - Insulating sleeve 0201728

MPS-IH BK - Insulating sleeve 0201731

TMT (EX9,5)R - Marker for terminal blocks 0828295

US-TM 100 - Marker for terminal blocks 0829255

PS-3,5 - Test plug 3031010

DP PS-3,5 - Spacer plate 3031011

PS-3,5/E - Test plug 3031012

ZBF 3,5:UNBEDRUCKT - Zack Marker strip, flat 0829392

ZBF 3,5 CUS - Zack Marker strip, flat 0829394

ZBF 3,5,LGS:FORTL.ZAHLEN - Zack Marker strip, flat 0801406

PTS 1,5/S-TWIN/1P - Feed-through terminal block

3214709