PB IP 400 ME-VFD-3A - Frequency inverter - 2734785

Notes

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product properties

Type	Stand-Alone
Diagnostics messages	Mains failure, phase failure Error message in the diagnostic code (bus) and display via the LED ERR on the module
	Motor connector not plugged in, motor temperature exceeded, thermistor line short-circuited Error message in the diagnostic code (bus) and display via the LED ERR on the module
	Sensor supply failure Error message in the diagnostic code (bus) and display via the LED ERR on the module
	Overcurrent Error message in the diagnostic code (bus) and display via the LED ERR on the module
	Output stage cannot be controlled Error message in the diagnostic code (bus) and display via the LED ERR on the module
	Short-circuit or overload of the digital outputs Message in the diagnostic code
	Module error during self test Message to the master

Electrical properties

Supply: Module electronics
Connection method	POWER-COMBICON
Designation	Terminal strip X13 and X15
Number of positions	2
Permissible conductor cross section	1.5 mm² ... 4 mm²
Pg screw connection	Pg16R
Supply voltage	24 V DC (U_S1)
Supply voltage range	20 V DC ... 30 V DC (including ripple)
Supply current	typ. 300 mA (at U_S1 = 24 V; plus current of digital inputs/outputs)
Ripple	Permissible ripple 3.6 V_pp within the permissible voltage range
Max. current carrying capacity	16 A
Derating	above 20 °C: 0.3 A/K
Electrical isolation/isolation of the voltage ranges
Test voltage: Remote bus / supply voltage U_S1	350 kV AC, 50 Hz, 1 min
Test voltage: Supply voltage U_S1 /400 V level	1.2 kV AC, 50 Hz, 1 min
Test voltage: Supply voltage U_S1 / brake relay	1.2 kV AC, 50 Hz, 1 min
Test voltage: Supply voltage U_S1 / thermistor inputs	1.2 kV AC, 50 Hz, 1 min
Test voltage: Local bus/400 V level	1.2 kV AC, 50 Hz, 1 min
Test voltage: Remote bus/brake relay	1.2 kV AC, 50 Hz, 1 min
Test voltage: Remote bus/thermistor inputs	1.2 kV AC, 50 Hz, 1 min

Input data

Digital: Digital inputs
Number of inputs	4
Connection method	M12 connector, A-coded
Connection technology	3-, 4-conductor
Number of positions	5
Input voltage	24 V DC (U_S1)
Input voltage range "0" signal	-30 V ... 5 V (binary "0")
Input voltage range "1" signal	13 V ... 30 V (binary "1")
Filter time	3 ms
Typical input current per channel	approx. 5 mA (for U_S1 = 24 V)

Interfaces

PROFIBUS interface
Connection method	M12 connector, B-coded
Designation connection point	M12 connector; X30 (IN) and X31 (OUT)
Number of positions	5
Permissible conductor cross section	0.25 mm² ... 0.75 mm² (flexible)

Signaling

Diagnostic messages
Diagnostics	Mains failure, phase failure
Message	Error message in the diagnostic code (bus) and display via the LED ERR on the module
Diagnostic messages
Diagnostics	Motor connector not plugged in, motor temperature exceeded, thermistor line short-circuited
Message	Error message in the diagnostic code (bus) and display via the LED ERR on the module
Diagnostic messages
Diagnostics	Sensor supply failure
Message	Error message in the diagnostic code (bus) and display via the LED ERR on the module
Diagnostic messages
Diagnostics	Overcurrent
Message	Error message in the diagnostic code (bus) and display via the LED ERR on the module
Diagnostic messages
Diagnostics	Output stage cannot be controlled
Message	Error message in the diagnostic code (bus) and display via the LED ERR on the module
Diagnostic messages
Diagnostics	Short-circuit or overload of the digital outputs
Message	Message in the diagnostic code
Diagnostic messages
Diagnostics	Module error during self test
Message	Message to the master

Dimensions

Width	410 mm
Height	214 mm
Depth	150 mm
Drill hole spacing	386 mm
Note on dimensions	Housing dimensions of housing upper and lower part with fixing clip

Mechanical properties

Technical data
Drill hole spacing	386 mm

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP54
Ambient temperature (operation)	-15 °C ... 40 °C (Without derating)
Note	Notes on operation Line protection for the network supply line, max. 20 A. Observe derating of the POWER-COMBICON connector
	Notes on operation Permitted network type TN network, TT network, IT network available on request
Air pressure (operation)	86 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)	86 kPa ... 106 kPa (up to 2000 m above sea level)
Ambient temperature (storage/transport)	-25 °C ... 75 °C
Permissible humidity (operation)	4 % ... 100 % (non-condensing)
Permissible humidity (storage/transport)	75 % (slight temporary condensation may sometimes appear on the housing)

Standards and regulations

Protection class	I (IEC 61140, EN 61140, VDE 0140-1)
Noise emission	Test of emitted interference, housing, in acc. with EN 50081-2:1993 EN 55011:1991 class A
Air clearances and creepage distances
Air clearances and creepage distances	in accordance with EN 50178: 1998

Item number	2734785
Packing unit	1 pc
Minimum order quantity	1 pc
Note	Made to order (non-returnable)
Sales key	DRF
Product key	DRFAAB
GTIN	4017918974206
Weight per piece (including packing)	5,174.1 g
Weight per piece (excluding packing)	5,174 g
Customs tariff number	85044090
Country of origin	DE

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)

PB IP 400 ME-VFD-3A - Frequency inverter

2734785