PSR-M-E2-DO16-PI - Extension module

1105136

Extension module with 16 signal outputs, TBUS interface, plug-in Push-in terminal block, TBUS connector included

Free download available. Downloads

Note on application
Note on application	Only for industrial use

Product type	Coupling relay
Application	Extension module
Insulation characteristics
Protection class	III (EN 50178)
Insulation characteristics
Overvoltage category	II
Degree of pollution	2
Times
Response time	see user manual
Restart time	min. 5 s (Boot time)
	max. 10 s (Boot time)

Maximum power dissipation for nominal condition	3.5 W (with max. permissible load)
Nominal operating mode	100% operating factor
Interfaces	DIN rail TBUS for connection to the master module, supplied as standard
Rated surge voltage/insulation	Basic insulation 4 kV between all current paths and housing
Supply
Designation	A1/A2
Rated control circuit supply voltage U_S	19.2 V DC ... 28.8 V DC
Rated control circuit supply voltage U_S	24 V DC -20 % / +20 % (provide external protection, typically 5 A)
Rated control supply current I_S	typ. 30 mA
Power consumption at U_S	typ. 0.72 W
Inrush current	2 A (Δt = 1 ms at U_s)
Filter time	typ. 5 ms (at A1 in the event of voltage dips at U_s)
Protective circuit	Serial protection against polarity reversal
	Suppressor diode
Supply
Designation	24V/A2
Rated control circuit supply voltage U_S	24 V DC -20 % / +20 % (provide external protection, typically 5 A)
Rated control supply current I_S	typ. 20 mA (Outputs active, without load)
Inrush current	10 A (at both terminal points 5 and 6, Δt = 1 ms at U_s)
Filter time	typ. 1 ms (in the event of voltage dips)
Protective circuit	Suppressor diode

Signal: MO1 ... MO16
Output description	PNP, IEC 61131-2 Typ 0,1
	non-safety-related
	Reference ground A2
Number of outputs	16
Output voltage when switched off	max. 0.1 V
Output voltage range	18.2 V DC ... 27.8 V DC (U_S - 1 V)
Voltage	24 V DC (via 24 V)
Maximum inrush current	1.1 A (Δt = 3 s at U_s)
Limiting continuous current	100 mA (per channel)
	1.6 A (Total current of all digital signal outputs)
Leakage current	max. 100 µA
Ohmic load	min. 180 Ω (Observe limiting continuous current)
Switching frequency	max. 1/4 x t_Cycle [Hz]
Protective circuit	Suppressor diode
Short-circuit protection	Yes (self-limitation at 1.1 A)
Discharging circuit	No
Cable length	max. 100 m (per output)

Connection technology
pluggable	yes
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 14
Stripping length	10 mm

Status display	1 x LED (green), 2 x LED (orange)
	16 x LED (yellow)
Operating voltage display	1 x LED (green)
Error indication	2 x LED (red)

Width	22.61 mm
Height	107.74 mm
Depth	113.6 mm

Color (Housing)	yellow (RAL 1018)
Housing material	Polyamide PA non-reinforced

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-10 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)	-20 °C ... 85 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	95 % (non-condensing)
Max. permissible relative humidity (operation)	95 % (non-condensing)
Shock	10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
Vibration (operation)	10 Hz ... 150 Hz, 2g

Mounting type	DIN rail mounting
Assembly note	Observe derating
Mounting position	vertical or horizontal

Item number	1105136
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	DNA
Product key	DNA364
GTIN	4055626975900
Weight per piece (including packing)	175.4 g
Weight per piece (excluding packing)	175.4 g
Customs tariff number	85371098
Country of origin	IT

Compatible products

Accessories

Your advantages

Cost-effective safety solution with a high level of adaptability to individual requirements

Fast startup, thanks to easy hardware and software configuration

Machine downtimes minimized with comprehensive, easy-to-understand diagnostics

Tool-free and time-saving installation thanks to Push-in technology

Low housing width of just 22.6 mm

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
China RoHS
Environment friendly use period (EFUP)	EFUP-E No hazardous substances above the limits
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-M-E2-DO16-PI - Extension module

1105136

Product details

ECLASS

ETIM

UNSPSC

Functional Safety

cULus Listed

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-M-E2-DO16-PI - Extension module 1105136

Product details

ECLASS

ETIM

UNSPSC

Compatible products

CP-MSTB - Coding profile 1734634

CR-MSTB - Coding section 1734401

CRIMPFOX 6 - Crimping pliers 1212034

EBP 2- 5 - Insertion bridge 1733169

Your advantages

PSR-M-E2-DO16-PI - Extension module

1105136