UMK-16 RM/KSR-G 24/21/PLC - Active module - 2979498

Product details

Technical data

Product properties

Product type	Interface module
No. of channels	16
	32
Operating mode	100% operating factor
Mechanical service life	3x 10⁷ cycles
Compatible components	Miniature relay, REL-MR- 24DC/21HC
With components	yes
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Electrical properties

Rated insulation voltage	300 V AC
Rated surge voltage	4 kV (Basic insulation between output contact current paths)
		6 kV (Safe isolation and reinforced insulation between input circuit and output contact paths)
Supported controller SIEMENS S7-1500
Suitable I/O card	6ES7522-1BL00-0AB0
		6ES7522-1BL01-0AB0
Supported controller SIEMENS S7-400
Suitable I/O card	6ES7422-1BL00-0AA0
		6ES7422-7BL00-0AB0
Supported controller ALLEN-BRADLEY PLC 5
Suitable I/O card	1771 OBN
Supported controller EMERSON DeltaV
Suitable I/O card	VE4002S1T2B6
Supported controller GE-FANUC RX3i
Suitable I/O card	IC694MDL754
Supported controller HONEYWELL Experion PKS C200
Suitable I/O card	TC-ODD 321
Supported controller MITSUBISHI MELSEC L
Suitable I/O card	LY41PT1P
		LY42PT1P
		QY82P
Supported controller MITSUBISHI MELSEC Q
Suitable I/O card	QY81P
Supported controller SCHNEIDER ELECTRIC Modicon TSX QUANTUM
Suitable I/O card	DDO 353
Supported controller SIEMENS S7-300 / ET 200 M
Suitable I/O card	6ES7322-1BL00-0AA0

Input data

Nominal input voltage U_N	24 V DC
Input voltage range in reference to U_N	0.9 ... 1.1
Input voltage range	21.6 V DC ... 26.4 V DC
Protective circuit	Freewheeling diode; Freewheeling diode
	Reverse polarity protection; Polarity protection diode
Operating voltage display	Green LED
Status display/channel	Yellow LED

Output data

Compatible components	Miniature relay, REL-MR- 24DC/21HC
Switching
Contact switching type	1 changeover contact
Maximum switching voltage	250 V AC/DC
Limiting continuous current	5 A
Min. switching current	10 mA
Interrupting rating (ohmic load) max.	120 W (24 V DC, τ = 0 ms)
	58 W (48 V DC, τ = 0 ms)
	48 W (60 V, τ = 0 ms)
	50 W (110 V DC, τ = 0 ms)
	80 W (220 V DC, τ = 0 ms)
	1250 VA (250 V AC, τ = 0 ms)

Connection data

Controller level
Connection method	IDC/FLK pin strip
Number of connections	1
Number of positions	50
Pitch	2.54 mm
Field level
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Number of connections	48
Conductor cross-section rigid	0.2 mm² ... 4 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Supply
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Number of connections	4
Conductor cross-section rigid	0.2 mm² ... 4 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Connection for basic module
Connection method	IDC/FLK pin strip
Number of connections	1
Number of positions	20
Pitch	2.54 mm

Signaling

Status display present	yes

Dimensions

Width	259 mm
Height	77 mm
Depth	59 mm

Material specifications

Color	green (RAL 6021)

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP00
Ambient temperature (operation)	-20 °C ... 50 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C

Standards and regulations

Standards/regulations	EN 61010-2-201
	IEC 60664

Mounting

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Notes

Notes on operation	Observe the maximum switching power of the relays used
Notes on operation	Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.
Notes on operation	The outputs are not suitable for switching different line conductors. The sum of the switching voltages used for adjacent outputs must not exceed the rated insulation voltage value
Notes on operation	The necessary requirements for insulation (basic insulation or reinforced insulation) from adjacent modules (in DIN-rail direction) must be realized by applying suitable measures (e. g., partition plates).
Notes on operation	For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.

Commercial data

Item number	2979498
Packing unit	1 pc
Minimum order quantity	1 pc
Note	Made to order (non-returnable)
Sales key	DK2
Product key	DK2191
GTIN	4017918130343
Weight per piece (including packing)	665.5 g
Weight per piece (excluding packing)	580 g
Customs tariff number	85364190
Country of origin	DE

Classifications

Approvals

Environmental product compliance

Compatible products

ECLASS-13.0	27141152
ECLASS-15.0	27141152

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a)
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Hexahydromethylphthalic anhydride (CAS: n/a)
REACH candidate substance (CAS No.)		Lead (CAS: 7439-92-1)
SCIP	89a6ac73-982d-454a-8bab-ad5283f974c1

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

UMK-16 RM/KSR-G 24/21/PLC - Active module

2979498

Product details

ECLASS

ETIM

UNSPSC

EAC

UL Listed

cUL Listed

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

UMK-16 RM/KSR-G 24/21/PLC - Active module 2979498

Product details

ECLASS

ETIM

UNSPSC

Compatible products

UMK-16 RM/KSR-G 24/21/E/PLC - Active module 2979508

REL-MR- 24DC/21HC - Single relay 2961312

SIM-ERSN-HB-MR - Retaining bracket 2271471

Your advantages

UMK-16 RM/KSR-G 24/21/PLC - Active module

2979498