Acquisition of weather data Weather stations for photovoltaic systems
Operators of photovoltaic systems want to be kept informed about the energy efficiency and reliability of their ground-mounted system at all times. One possible measurement of this is the performance ratio, which indicates the ratio of the actual system yield to the yield that is theoretically possible.
If the value decreases unexpectedly, this indicates a system error. Weather stations measure important weather data, such as solar irradiation, wind speed, and temperature, around the clock. These data are included in the calculation of the performance ratio.
Operators of ground-mounted systems require the acquisition of all weather data provided by the sensors. The data must be transmitted to a central SCADA system for monitoring and control via suitable interfaces. Data acquisition and transmission must be guaranteed for all ambient conditions that may occur in the field.
Phoenix Contact offers everything you need for the acquisition of weather data from a single source. Standard 61724-1 describes the accuracy requirements for environmental sensors with respect to system classes A to C. Class A systems are photovoltaic power plants that must meet the strictest requirements. All of the sensors available from Phoenix Contact meet the requirements for this class.
- All sensors meet the requirements of IEC 61724-1 for Class A systems
- Minimal startup and configuration effort with plug-and-play connection of the weather sensors
- Flexibility due to the individual selection of sensors
- Easy connection with industrial-quality M12 circular connectors and support of standardized interfaces
- Installation-friendly: Fast integration without programming knowledge
Weather data acquisition for ground-mounted systems Universally applicable and easy integration into the overall system
Our weather station sensors are equipped with a Modbus interface, which brings a number of advantages along with it. First, only one interface is needed for data acquisition from all sensors, which minimizes system and interface costs. When requirements change, sensors can be easily added or even omitted without affecting the interface. This makes the application easy to replicate, even in the face of changing requirements.
As opposed to compact weather stations, the sensors available from Phoenix Contact are individual modules. This means that if an individual sensor fails, only that sensor needs to be replaced. Replacement is fast and easy with the M12 circular connectors from Phoenix Contact, which meet the industry‘s rigorous standards.
If you use our data acquisition station, you can connect directly to the switchgear and controlgear assembly using circular connectors. The system includes an uninterruptible power supply for bridging short power outages.
The application program we developed in-house features an integrated web-based management system, which makes it possible to commission the sensors without any programming knowledge. The auto-configuration function automatically detects all of the sensors connected in the bus and with the integrated controller, enables them to transmit using common interfaces such as Modbus/TCP and PROFINET.
At a supply voltage of 24 V, all of the sensors have reverse-polarity protection, which minimizes your investment risk.