FL WLAN 1022 - Wireless module - 1752493

Product properties

Product type	Wireless module
Type	Stand-alone
Insulation characteristics
Overvoltage category	II (IEC 61010-1)
Pollution degree	2
Wireless card
Type	IEEE 802.11 a/b/g/n/ac/ax 2,4 GHz, 5 GHz > 600 MBit/s
Assembly note	Permanently installed

Electrical properties

Maximum power dissipation for nominal condition	4.3 W
Test section	24 V supply / functional ground 500 V DC 1 min
		Ethernet interface/all other potentials 2.25 kV DC 1 min
		24 V supply/internal communications 500 V DC 1 min
Supply: Module electronics
Connection technology	COMBICON
Connection method	Push-in spring connection
Note on the connection method	Recommended conductor cross section: 0.75 mm²
		Recommended ferrule: connection length 10 mm
		Recommended crimping pliers: trapezoidal or square
Designation	1128752 FMC 1,5/ 3-ST-3,5-RF GY35BD1-3
Number of positions	3
Cross section range AWG	24 ... 16
Supply voltage	24 V DC (SELV)
Supply voltage range	9 V DC ... 32 V DC (PELV/SELV)
Supply current	typ. 180 mA (at Unom/ 20°C/ max. data throughput)
Current consumption	max. 800 mA (At Umin/Tmax/max. data throughput)

Connection data

1128752 FMC 1,5/ 3-ST-3,5-RF GY35BD1-3
Connection method	Push-in spring connection
Conductor cross-section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross-section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross-section AWG	24 ... 16
Stripping length	10 mm

Interfaces

Antenna
Number	2
Note on the connection method	MIMO
Functions
Configuration	Web-based management, automated CLI, REST API
Quality of service (QoS)	Yes
Wireless licenses	Europe, additional countries in the e-shop
Country support	Belgium
		Bulgaria
		Denmark
		Germany
		Estonia
		Finland
		France
		Greece
		Great Britain
		Ireland
		Italy
		Latvia
		Liechtenstein
		Lithuania
		Luxembourg
		Malta
		Netherlands
		Norway
		Austria
		Poland
		Portugal
		Romania
		Sweden
		Switzerland
		Slovakia
		Slovenia
		Spain
		Czech Republic
		Hungary
		Cyprus (rep.)
Ethernet (RJ45)
Number of interfaces	1
Connection method	RJ45
Note on the connection method	Auto negotiation and autocrossing
Transmission speed	10/100/1000 Mbps
Transmission physics	Copper
Transmission length	100 m (per segment)
No. of channels	1 (RJ45 ports)
Wireless
Designation	Wireless LAN
Antenna connection method	RSMA (female)
Frequency band	2.4 GHz
		5 GHz
		6 GHz
Wireless standard	WLAN
		IEEE 802.11
		a
		b
		g
		n
		ac
		ax
		Wi-Fi 6
Transmission power	max. 19.5 dBm (with two antennas)
Number of wireless interfaces	1 IEEE 802.11 a/b/g/n/ac/ax
Wireless modules that can be connected	20 (10 per virtual interface in AP mode)

Dimensions

Width	63 mm
Height	26 mm
Depth	113 mm
Note on dimensions	Installed dimensions without connector

Material specifications

Material base plate	Die-cast zinc, nickel-plated
Housing material	PC

Environmental and real-life conditions

Ambient conditions
Ambient temperature (operation)	-30 °C ... 60 °C
Degree of protection	IP20
Air pressure (operation)	800 hPa ... 1080 hPa (up to 2000 m above sea level)
Air pressure (storage/transport)	660 hPa ... 1080 hPa (Up to 3500 m above mean sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)

EMC data

Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	± 6 kV
Discharge in air	± 8 kV
Indirect discharge	± 6 kV
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 1000 MHz
Test field strength	10 V/m
Frequency range	1000 MHz ... 6000 MHz
Test field strength	3 V/m
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Comments	±2.2 kV
Surge current load (surge)
Standards/regulations	EN 61000-4-5
Surge current load (surge)
Signal	± 0.5 kV (symmetrical)
Signal		± 1 kV (asymmetrical)
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz
Voltage	10 V
Emitted interference
Standards/regulations	EN 55032
Test result	Class B

Mounting

Mounting type	Panel mounting, optional DIN rail adapter
Assembly note	Antennas not included in scope of supply

Item number	1752493
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	DNN2W4
Product key	DNN2W4
GTIN	4067923318397
Weight per piece (including packing)	264 g
Weight per piece (excluding packing)	370 g
Customs tariff number	85176200
Country of origin	DE

ECLASS-13.0	19170501
ECLASS-15.0	19170501

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
EU REACH SVHC
REACH candidate substance (CAS No.)	4,4'-isopropylidenediphenol (CAS: 80-05-7)
		Lead (CAS: 7439-92-1)
		2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol (CAS: 79-94-7)
		2-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyl)phenol (UV-329) (CAS: 3147-75-9)

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

FL WLAN 1022 - Wireless module

1752493

Product details

ECLASS

ETIM

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

FL WLAN 1022 - Wireless module 1752493

Product details

ECLASS

ETIM

Compatible products

FL RMS 20 - DIN rail adapter 1178237

ANT-OMNI-2459-04 - Antenna 1284780

RAD-PIG-EF316-N-RSMA - Antenna cable 2701402

FL MICRO SD FLASH - Program/configuration memory 1129482

NBC-COX-CNM/0.5-S/COX-CLM - Coaxial cable 1340130

NBC-COX-CNM/1.0-M/COX-CLM - Coaxial cable 1340131

NBC-COX-CNM/1.5-M/COX-CLM - Coaxial cable 1340133

NBC-COX-CNM/2.0-M/COX-CLM - Coaxial cable 1340135

RAD-ADP-N/F-N/F - Adapter 2867843

Your advantages

Frequently searched

FL WLAN 1022 - Wireless module

1752493