Input solid-state relay, transmission frequency: 100 kHz, with LED and protective circuit in input and output circuits, input: 24 V DC, output: 4 - 30 V DC/50 mA
Product details
Product type
Solid-state relay module
Product family
PLC-INTERFACE
Application
100 kHz input optocoupler
Operating mode
100% operating factor
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation
Basic insulation
Overvoltage category
II
Pollution degree
2
Data management status
Date of last data management
03.07.2025
Maximum power dissipation for nominal condition
0.14 W
Test voltage (Input/output)
2.5 kVrms (50 Hz, 1 min., input/output)
Air clearances and creepage distances between the power circuits
Rated insulation voltage
50 V DC
Rated surge voltage
0.5 kV
Nominal input voltage UN
24 V DC
Input voltage range in reference to UN
0.8 ... 1.2
Input voltage range
19.2 V DC ... 28.8 V DC
Switching threshold "0" signal in reference to UN
< 0.4
Switching threshold "1" signal in reference to UN
> 0.8
Typical input current at UN
6 mA
Typical response time
1.5 µs
Typical turn-off time
2 µs
Operating voltage display
Yellow LED
Protective circuit
Reverse polarity protection
Surge protection
Surge voltage protection
> 33 V
Transmission frequency
100 kHz
Designation
Output data
Contact switching type
1 N/O contact
Design of digital output
electronic
Output voltage range
4 V DC ... 30 V DC
Limiting continuous current
50 mA
Quiescent current
4.3 mA
Surge voltage protection
> 35 V
Voltage drop at max. limiting continuous current
< 0.5 V
Output circuit
3-conductor, ground-referenced
Protective circuit
Reverse polarity protection
Surge protection
Connection method
Screw connection
Stripping length
8 mm
Screw thread
M3
Conductor cross section rigid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG
26 ... 14
Tightening torque
0.6 Nm ... 0.8 Nm
Width
6.2 mm
Height
80 mm
Depth
86 mm
Color
gray (RAL 7042)
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-25 °C ... 75 °C
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Air clearances and creepage distances between the power circuits
Standards/regulations
DIN EN 50178
Mounting type
DIN rail mounting
Assembly note
in rows with zero spacing
Mounting position
any
Item number
2902964
Packing unit
1 pc
Minimum order quantity
1 pc
Sales key
DK6215
Product key
DK6215
GTIN
4046356702829
Weight per piece (including packing)
43.3 g
Weight per piece (excluding packing)
33.6 g
Customs tariff number
85364900
Country of origin
DE
ETIM
ETIM 8.0
EC001504
UNSPSC
UNSPSC 21.0
39122300
EU RoHS
Fulfills EU RoHS substance requirements
Yes
Exemption
7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)
EFUP-50
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)
Lead(CAS: 7439-92-1)
Compatible products
Note: Applying some accessories below might limit this product.
