ELR W3/ 9-500 MM
-
Reversing load relay
2963543
Electronic reversing load relay with motor management, for direct driving of equipment in the 3-phase network, output: 110-550 V AC/3 x 8 A
Free download available.
Downloads
Product details
| Product type | Electronic motor manager |
| Operating mode | 100% operating factor |
| Number of phases | 3 |
| Mains type | 3-phase |
| Test voltage input/output | 2.5 kV |
| Reversing frequency | ≤ 2.5 Hz (at cos φ = 0.5) |
| Supply | |
| Input name | Device supply |
| Nominal supply voltage | 24 V DC |
| Supply voltage range with reference to UVN | 0.8 ... 1.2 |
| Quiescent current | 80 mA AC |
| Protective circuit | Reverse polarity protection; Series polarity protection diode |
| Surge protection | |
| Operating voltage display | Green LED |
| Error indication | Red LED |
| Status display | LED (yellow) |
| Control | |
| Input name | Control input right/left |
| Nominal input voltage UN | 24 V DC |
| Input voltage range in reference to UN | 0.8 ... 1.2 |
| 0.8 ... 1.2 | |
| Typical input current at UN | 7 mA |
| Reaction time in normal load operation | < 35 ms |
| Typical response time | < 25 ms |
| Typical turn-off time | < 25 ms |
| Reaction time in normal load operation | < 35 ms |
| Switch-over frequency | < 2.5 Hz (at cos φ = 0.5) |
| Current measurement | |
| Basic accuracy | ± 2 % (Of end value, typ. ± 1%) |
| Current range | 0.25 A ... 8 A |
| Measuring via | Current transformer for any conductor current |
| AC output | |
| Nominal output voltage | 500 V AC |
| Nominal output voltage range | 110 V AC ... 550 V AC |
| Peak offstate voltage | 1500 V |
| Mains frequency | 50 Hz |
| 60 Hz | |
| Load current range | 150 mA ... 8 A (see to derating) |
| Leakage current | typ. 7 mA |
| Residual voltage | typ. 1.4 V |
| Surge current | 360 A (tp = 10 ms, at 25 °C) |
| Max. load value | 645 A2s |
| Protective circuit | RC element; RC element |
| Surge protection | |
| Surge voltage protection | > 880 V |
| Acknowledging contacts O1-O4 | |
| Number of outputs | 4 |
| Nominal output voltage | UVN - 1 V |
| Continuous load current | max. 50 mA |
| Control circuits | |
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 6 mm² |
| Conductor cross section flexible | 0.2 mm² ... 4 mm² |
| Conductor cross section AWG | 24 ... 10 |
| Load circuit | |
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 6 mm² |
| Conductor cross section flexible | 0.2 mm² ... 4 mm² |
| Conductor cross section AWG | 24 ... 10 |
| Data | |
| Interface | RS-232 |
| Transmission speed | 4800 bit |
| Width | 62 mm |
| Height | 94 mm |
| Depth | 122 mm |
| Color | green (RAL 6021) |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -20 °C ... 60 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Air clearances and creepage distances between the power circuits | |
| Standards/regulations | DIN EN 50178 |
| safe isolation | |
| Power station requirements | |
| Standards/regulations | DWR 1300/ZXX01/DD/7080.8d |
| EMC regulations | |
| Standards/regulations | EN 61000-6-2 |
| EN 61000-6-4 | |
| Assembly note | Can be aligned with > 20 mm spacing |
| Mounting position | Vertical (horizontal DIN rail) |
| Item number | 2963543 |
| Packing unit | 1 pc |
| Minimum order quantity | 1 pc |
| Product key | DK7222 |
| Catalog page | Page 169 (IF-2011) |
| GTIN | 4017918899691 |
| Weight per piece (including packing) | 868.5 g |
| Weight per piece (excluding packing) | 742.72 g |
| Country of origin | DE |
| China RoHS | |
| Environment friendly use period (EFUP) |
EFUP-50
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
|
| EU REACH SVHC | |
| REACH candidate substance (CAS No.) | No substance above 0.1 wt% |
Your advantages
Optional connection to ELR-PB-GATEWAY
Continuous status monitoring
Special ELR-MM EX devices suitable for use in the chemical and petrochemical industries. A corresponding Ex-type examination certificate has been issued.
Real power consumed calculated every 6.6 ms
Freely parameterizable signaling and switching thresholds for underload/overload detection
Display of apparent, real, and reactive power, currents, voltages, phase angle, cycle counter, and operating hours counter
Switching of actuating/variable-speed drives, pumps, and tools with function, dirt or wear monitoring
PHOENIX CONTACT SAS
52 Boulevard de Beaubourg; Emerainville 77436 Marne La Vallée Cedex 2