IB IL RS 485/422-2MBD
-
Inline function terminal
2855839
Inline RS-485/422 function terminal block, without accessories, 1 serial input and output channel, transmission speed 2 Mbaud
Free download available.
Downloads
Product details
| Dimensional drawing |
|
| Width | 24.4 mm |
| Height | 119.8 mm |
| Depth | 71.5 mm |
| Mounting type | DIN rail mounting |
| Color | green |
| Inline local bus | |
| Connection method | Inline data jumper |
| Transmission speed | 2 Mbps |
| RS-485 half duplex or RS-422 full duplex (as alternative only) | |
| Connection method | Spring-cage connection |
| Transmission speed | 110 bps ... 38400 bps (configurable) |
| Transmission physics | Copper |
| Input buffer | 4 kByte |
| Output buffer | 1 kByte |
| Data bits | 7 or 8 |
| Stop bits | 1 or 2 |
| Programming data | |
| Length code (hex) | 01 |
| ID code (dec.) | 220 |
| Length code (dec) | 01 |
| Process data channel | 16 bit |
| Input address area | 2 Byte |
| Output address area | 2 Byte |
| Parameter channel (PCP) | 4 Byte |
| Register length (bus) | 48 bit |
| Fieldbus data telegram | |
| Required parameter data | 27 Byte |
| Product type | I/O component |
| Product family | Inline |
| Type | modular |
| Number of plugs | 2 |
| Insulation characteristics | |
| Protection class | III (IECÂ 61140, ENÂ 61140, VDEÂ 0140-1) |
| Test section | 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 VÂ AC 50 Hz 1 min |
| 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 VÂ AC 50 Hz 1 min | |
| RS-485/422 interface / 7.5 V supply (bus logics) 500 VÂ AC 50 Hz 1 min | |
| RS-485/422 interface / 24 V supply (I/O) 500 VÂ AC 50 Hz 1 min | |
| RS-485/422 interface/functional ground 500 VÂ AC 50 Hz 1 min | |
| 7.5 V supply (bus logics)/24 V supply (I/O) 500 VÂ AC 50 Hz 1 min | |
| 7.5Â V supply (bus logic)/functional ground 500 VÂ AC 50 Hz 1 min | |
| 24Â V supply (I/O) / functional ground 500 VÂ AC 50 Hz 1 min | |
| Supply | |
| I/O voltage | 24 VÂ DC (via power distributor) |
| I/O voltage range | 19.2 VÂ DC ... 30 VÂ DC (including ripple) |
| Residual ripple | ± 1.2 V |
| Max. current consumption | 260 mA |
| Typical current consumption | 185 mA |
| Potentials: Communications power (UL) | |
| Supply voltage | 7.5 VÂ DC (via voltage jumper) |
| Current draw | max. 260 mA (all connections of the serial interface are short-circuited) |
| typ. 185 mA | |
| Connection technology | |
| Connection name | Inline connector |
| Inline connector | |
| Connection method | Spring-cage connection |
| Conductor cross-section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross-section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 28 ... 16 |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C ... 55 °C |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 75 % ... 85 % (in the range of -25°C ... +55°C, appropriate measures against increased humidity (> 85%) must be taken.) |
| Permissible humidity (storage/transport) | 75 % ... 85 % (Slight temporary condensation may sometimes appear on the housing, e.g. when the terminal block is brought out of a vehicle into an enclosed room.) |
Your advantages
Diagnostic and status indicators
4Â kbyte receive buffer and 1Â kbyte transmit buffer
Number of data bits, stop bits and parity can be set
Transmission speed can be set up to 38400Â bps
Various protocols supported
1Â serial input and output channel as RS-485 or RS-422 version