The Axioline E digital output device is connected to an IO-Link master via an IO-Link B-port. It is used to output digital signals via IO-Link. Use within different networks is possible via the IO-Link master.
AXL E IOL DO8 M12 6P
-
Digital module
2702659
Axioline E, Digital output device, IO-Link ports Class B: 1, connection method: M12 connector, A-coded, connection technology: 5-conductor, Digital outputs: 8, 24 V DC, 500 mA, connection technology: 3-conductor, Plastic housing, degree of protection: IP65/IP67
Free download available.
Downloads
Product details
| Dimensional drawing |
|
| Width | 60 mm |
| Height | 141 mm |
| Depth | 20 mm |
| Note on dimensions | The height is 170 mm including fixing clips. The depth is 30 mm including the connector. |
| Note on application | |
| Note on application | Only for industrial use |
| Utilization restriction | |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Housing material | Pocan® |
| Color | anthracite grey RAL 7016 |
| IO-Link | |
| Number of ports | 1 |
| Connection method | M12 connector, A-coded |
| Connection technology | 5-conductor |
| Port type | Class B |
| Specification | V1.1.2 |
| Reverse polarity protection | yes |
| Transmission speed | 230.4 kbps (COM3) |
| Cycle Time | < 1 ms |
| Amount of process data | 16 bit (Output data) |
| Digital: | |
| Output name | Digital outputs |
| Connection method | M12 connector |
| Connection technology | 3-conductor |
| Number of outputs | 8 |
| Protective circuit | Overload protection, short-circuit protection of outputs; Electronic |
| Output voltage | 24 V DC |
| Limitation of the voltage induced on circuit interruption | -28 V ... -15 V |
| Output current | max. 500 mA (per port) |
| max. 4 A (per device) | |
| Nominal output voltage | 24 V DC (from voltage UA) |
| Load min. | 10 kΩ |
| Output voltage when switched off | max. 1 V |
| Output current when switched off | max. 300 µA |
| Nominal load, inductive | max. 12 VA (1.2 H, 48 Ω, with nominal voltage) |
| Nominal load, lamp | max. 12 W (at nominal voltage) |
| Nominal load, ohmic | max. 12 W (48 Ω, with nominal voltage) |
| Switching frequency | max. 1000 per second |
| max. 1 per second (with inductive load) | |
| max. 16 per second (with nominal lamp load) | |
| Reverse voltage resistance to short pulses | limited protection up to 0.5 A for 1 s |
| Behavior with overload | Auto restart |
| Behavior with inductive overload | Output can be destroyed |
| Signal delay | max. 100 µs (when switched on) |
| max. 100 µs (when switched off, with at least 50 mA load current) | |
| Overcurrent shut-down | as of 0.7 A |
| Output current with ground connection interrupt when switched off | < 1 mA |
| Product type | I/O component |
| Product family | Axioline E |
| Type | Stand-Alone |
| Special properties | Plastic housing |
| Supply: IO-Link | |
| Designation | IO-Link port supply (L+) |
| Nominal voltage for I/O supply | 24 V DC (Provided via the IO-Link interface of the IO-Link master.) |
| Supply voltage range | 20 V DC ... 30 V DC (including all tolerances, including ripple) |
| Nominal current per device | approx. 15 mA |
| Permissible cable length | max. 20 m |
| Protective circuit | Reverse polarity protection; yes |
| Supply: Actuators | |
| Designation | Supply of actuators (UA) |
| Supply voltage | 24 V DC (Nominal voltage) |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current consumption | max. 500 mA (per port) |
| max. 4 A (Device dependent; observe the current of the IO-Link master that is made available via UA.) | |
| Electrical isolation/isolation of the voltage ranges | |
| Test voltage: 24 V supply (logic supply)/24 V supply (actuator supply) | 500 V AC, 50 Hz, 1 min |
| Test voltage: 24 V supply (logic supply) / FE | 500 V AC, 50 Hz, 1 min |
| Test voltage: 24 V supply (actuator supply)/FE | 500 V AC, 50 Hz, 1 min |
| Connection method | M12 connector |
| Note on the connection method | in accordance with IEC 61076-2-101, M12 connection technology |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Degree of protection | IP65/IP67 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -25 °C ... 70 °C |
| Permissible humidity (operation) | 5 % ... 95 % |
| Permissible humidity (storage/transport) | 5 % ... 95 % |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Mounting type | Panel mounting |
cUL Listed
Approval ID: E238705cUL Listed
Approval ID: E238705UL Listed
Approval ID: E238705
Your advantages
Connection to an IO-Link master with M12 connector (A-coded, 4-pos.)
Type B port with additional power supply
IO-Link specification V1.1.2
Connection up to 8 outputs with M12 connectors (A-coded, 5-pos.)
Diagnostic and status indicators
Short-circuit and overload protection of the sensor supply
Device rating plate stored
IP65/IP67 degree of protection