Sample set, 8-position, Socket, straight, M12, coding: Y, Rear mounting, THR solder connection, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %)
Product details
Notes on operation
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Product type
Contact insert
Application
Hybrid
Number of positions
8
Shielded
yes
Coding
Y
Thread type
M12
Insulation characteristics
Overvoltage category
III
Degree of pollution
3
Rated surge voltage
0.8 kV
Contact resistance
≤ 3 mΩ
Insulation resistance
> 100 MΩ
Nominal voltage UN
30 V (Power and data)
Nominal current IN
0.5 A (Data)
6 A (Power)
Transmission characteristics (category)
CAT5 (IEC 11801:2002)
Connection method
THR solder connection
Length of the solder pin
2.3 mm
2.3 mm
Material
Zinc die-cast (nickel-plated)
Flammability rating according to UL 94
V0
Contact material
CuZn
Contact surface material
Au
Contact carrier material
PPA
Connection 1
Head design
Socket
Head cable outlet
straight
Head thread type
M12
Coding
Y
Mechanical data
Insertion/withdrawal cycles
> 100
Ambient conditions
Degree of protection
IP67 (When plugged in)
IP67, when plugged in
Ambient temperature (operation) (male connector/female connector)
