B-STIFT
- Marker pen
B-STIFT
- Marker pen
1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Plotter and engraver
Our plotter marks high-quality marking materials to create durable markings. Simply switching the standard plotter head with the engraving unit converts the plotter into an engraving system. Markings created with this system are very durable even under extreme conditions.
CLEANING STICK
- Cleaning pen
CLEANING STICK
- Cleaning pen
5146697
Cleaning stick for fast and efficient printhead cleaning of all Phoenix Contact thermal transfer printers.
CMS-DISPOSABLE-PEN 0,25 TR
- Marker pen
CMS-DISPOSABLE-PEN 0,25 TR
- Marker pen
5146685
Disposable pen, incl. adapter, integrated ink cartridge and pen station, writing thickness: 0.25 mm
CMS-R-SET-TR
- Cleaning set
CMS-R-SET-TR
- Cleaning set
5146751
Cleaning set, consisting of: 1x cleaning cup, 2x cleaning cartridges with 10 ml cleaning fluid each and 2x replacement sealing caps for the CMS-PEN ... and CMS-DISPOSABLE-PEN ...
CMS-PEN 0,35
- Marker pen
CMS-PEN 0,35
- Marker pen
5067828
Marker pen, incl. adapter, ink tank and reservoir, 0.35 mm nib
P1 GRAVER 0.5
- Engraving tool
P1 GRAVER 0.5
- Engraving tool
5145504
Engraving tool, with a point angle of 15°, point diameter: 0.5 mm
CMS-INK-TR-C5
- Ink cartridge
CMS-INK-TR-C5
- Ink cartridge
5146684
Ink cartridge, special black ink, 5 cartridges of 1 ml each, for high demands
CMS-PEN 0,25
- Marker pen
CMS-PEN 0,25
- Marker pen
5067815
Marker pen, incl. adapter, ink tank and reservoir, 0.25 mm nib
CMS-GTG 0,75
- Fully hard metal chisel
CMS-GTG 0,75
- Fully hard metal chisel
5066557
Fully hard metal chisel, 1 cutting edge, cutting width: 0.75 mm
CMS-GRAV 32-PAD 305X400X3
- Accessories
CMS-GRAV 32-PAD 305X400X3
- Accessories
5144974
Non-slip pads for fixing engraving plates on the engraving machine CMS GRAV 32, dimensions: 305 x 400 x 3 mm
Your advantages
- Easy operation of the plotter with the PROJECT complete marking software
- Fast startup with a USB and Centronics interface
- User-friendly: clear operation with just four keys
The plotter with engraving unit
The plotter with engraving unit is the ideal marking system for use in workshops.
You can use the system to engrave metals and special double-layer plastics. Engraving chisels are available with diameters ranging from 0.2 to 1.0 mm for creating different line thicknesses.
Engraved labels can be used, for example, to mark cables that are laid in the ground.
Create durable markings for aggressive environments.