Nut - PV-FT-C NUT BK
1775880

Panel feed-through, Range of articles: Sunclix, Nut, number of positions: 0


Detalii despre produs


Nut for securing SUNCLIX panel feed-throughs to housing. NB: This nut must always be ordered separately.



Safety note
Safety note • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.

Product type Panel feed-through
Number of positions 0
Pitch 5.08 mm

Width 17 mm
Height 10 mm
Length 19 mm
Pitch 5.08 mm

Mechanical data
Locking type Nut

Contact surface Tin Sn
Cable gland material PA

Ambient conditions
Resistance to oil no

Ambient temperature (operation) -40 °C ... 85 °C
Ambient temperature (assembly) -25 °C ... 50 °C
Resistance to oil no

Resistance to oil no

Număr articol 1775880
Unitate de ambalare 100 Bucată
Cantitate minimă pentru comandă 100 Bucată
Cod produs ABLBZC
GTIN 4046356511766
Greutate pe bucată (inclusiv ambalajul) 1,55 g
Greutate pe bucată (fără ambalaj) 1,528 g
Cod tarifar vamal 39269097
Țara de origine DE


ECLASS

ECLASS-9.0 27144424
ECLASS-10.0.1 27144424
ECLASS-11.0 27144424

ETIM

ETIM 8.0 EC000940

UNSPSC

UNSPSC 21.0 31161700

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values