Infrastructure charging socket set - EV-T2M3SO12-3P-P-SET
1164422

CHARX connect, Infrastructure charging socket set, for charging electric vehicles (EV) with alternating current (AC), can be reconnected, with temperature sensors, with LED status indicator within the protective cover, with rear protective cap for strain relief and touch protection, Type 2, IEC 62196-2, 32 A / 480 V (AC), without cable, Rear panel mounting, M5 thread, P-Line, housing: black, PHOENIX CONTACT logo


Detalii despre produs


Infrastructure charging sockets with protective cover, for charging electric vehicles (EV) with alternating current (AC), compatible with Type 2 Infrastructure Plugs. For installation at charging stations for E-Mobility (EVSE)




Product type Infrastructure charging socket set
Application for charging electric vehicles (EV) with alternating current (AC)
compatible with infrastructure charging plugs
Design can be reconnected
with temperature sensors
with LED status indicator within the protective cover
with rear protective cap for strain relief and touch protection
Locking type Locking in the inserted state with a locking mechanism
Affixed logo PHOENIX CONTACT logo
Charging standard Type 2
Charging mode Mode 3, Case B

Type of signal transmission Pulse width modulation
Note on the connection method Connection via spade connector, separable
Type of charging current AC 3-phase
Charging power max. 26.6 kW
Charging current max. 32 A
Power contact
Number 5 (L1, L2, L3, N, PE)
Rated voltage 480 V AC
Rated current 32 A
Signal contact
Number 2 (CP, PP)
Rated voltage 30 V AC
Rated current 2 A
Temperature sensors (PTC chain)
Sensor type PTC chain
Standards/regulations DIN˽EN 60738-1
Diagnostics Short circuit, cable break
Attachment point Sensor for the AC contacts
Messbereich_Widerstand 800 Ω ... 300 kΩ
Resistance max. 10 Ω
Recommended measured current ≤ 1 mA (Umax= 24 V DC)
Locking actuator
Operating voltage 12 V
Note number of positions 3-pos.
Position of the locking actuator top center
Locking actuator
Operating voltage 12 V
Note number of positions 3-pos.
Position of the locking actuator top center
Possible power supply range at the motor 9 V ... 15.5 V
Operating current < 1.8 A
Typical motor current for locking 250 mA Average run current
Reverse current of the motor max. 2.4 A (Stall current)
Max. dwell time with reverse current 4 s
Recommended triggering time 200 ms ... 10 s (ton, typical)
Pause time after entry or exit path 8x (ton, typical)
Service life insertion cycles > 10000 load cycles
Lock recognition available
Lock setting LOCK (Lever in horizontal position)
UNLOCK (Lever in vertical position)
Mechanical emergency release available
Ambient temperature (operation) -30 °C ... 50 °C
Cable length 0.5 m
Cable structure 3 x 0.5 mm²

Width 75 mm
Height 112.54 mm
Depth 87.95 mm (with attachable cap for strain relief and touch protection, see accessories)
73.35 mm (without attachable cap for strain relief and touch protection, see accessories)
Bore dimensions 60 mm x 60 mm

Material Silver

Cable type without cable

Mechanical data
Insertion/withdrawal cycles > 10000
Insertion force < 100 N
Withdrawal force < 100 N

Ambient conditions
Degree of protection (when plugged in) IP44 (plugged in)
Degree of protection IP44 (plugged in)
IP54 (with protective cover)
Ambient temperature (operation) -30 °C ... 50 °C
Ambient temperature (storage/transport) -40 °C ... 80 °C
Altitude 5000 m (above sea level)

Standards
Standards/regulations IEC 62196-2

Mounting type Infrastructure charging socket Rear panel mounting (0 to 90 degree frontal inclination possible)
Mounting type Protective cover Rear panel mounting (available separately)
Max. wall thickness max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
max. 28 mm (Rear mounting, normative maximum specification for infrastructure plug when using protective cover 1405217)
Mounting hole diameter 7.00 mm (ø)
Fixing screws M5 thread
Screws included in the scope of delivery none

Număr articol 1164422
Unitate de ambalare 1 Bucată
Cantitate minimă pentru comandă 1 Bucată
Cod produs XWBADC
GTIN 4063151177799
Greutate pe bucată (inclusiv ambalajul) 616 g
Greutate pe bucată (fără ambalaj) 614 g
Cod tarifar vamal 85366990
Țara de origine DE


ECLASS

ECLASS-9.0 27144706
ECLASS-10.0.1 27144706
ECLASS-11.0 27144706

ETIM

ETIM 8.0 EC002898

UNSPSC

UNSPSC 21.0 39121800

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 10;
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Avantajele dumneavoastră

Charging status intuitively visible at a glance with color LED indicator
Protected against overheating with precise temperature measurement
Flexible mounting and easy maintenance with plug-in cables
Available with your logo on request – for consistent branding of your charging station
Waterproof and dirtproof due to fully molded contacts
Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001
Uniform, space-saving installation space