DIN rail connector - ME 17,5 TBUS 1,5/ 5-ST-3,81 GN 2709561

DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.

Detalii despre produs




Header 1
CTI according to IEC 60112 600
Insulating material PA

Ambient temperature (operation) -40 °C ... 105 °C (dependent on the derating curve)
Ambient temperature (assembly) -5 °C ... 100 °C
Ambient temperature (storage/transport) -40 °C ... 55 °C
Glow-wire test
Temperature 850 °C
Time of exposure 30 s
Specification IEC 60695-2-10:2013-04
Durability test
Contact resistance R2 4.5 mΩ
Contact resistance R1 4.4 mΩ
Impulse withstand voltage at sea level 2.95 kV
Specification IEC 60512-9-1:2010-03
Insertion/withdrawal cycles 25
Climatic test
Thermal stress 100 °C/168 h
Corrosive stress 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle
Power-frequency withstand voltage 1.39 kV
Specification ISO 6988:1985-02
Vibration test
Amplitude 0.35 mm (10 - 60.1 Hz)
Test duration per axis 2.5 h
Frequency 10 - 150 - 10 Hz
Specification IEC 60068-2-6:2007-12
Sweep speed 1 octave/min
5g (60.1 - 500 Hz)
Shocks
Test directions X-, Y- and Z-axis (pos. and neg.)
Specification IEC 60068-2-27:2008-02
Acceleration 15g
Shock duration 11 ms
Pulse shape Semi-sinusoidal

Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Nominal current IN 8 A
8 A (parallel contacts)
Maximum load current 8 A
Nominal voltage UN 125 V

Length 20.45 mm
Pitch 3.81 mm
Height 36.3 mm
Width 24.2 mm
PCB design

Contact holder in insert
Test force per pos. 20 N
Specification IEC 60512-15-1:2008-05
Result Test passed
Polarization and coding
Specification IEC 60512-13-5:2006-02
Result Test passed
Insertion and withdrawal forces
No. of cycles 25
Withdraw strength per pos. approx. 5 N
Insertion strength per pos. approx. 6 N
Result Test passed
Visual inspection
Specification IEC 60512-1-1:2002-02
Result Test passed
Dimension check
Specification IEC 60512-1-2:2002-02
Result Test passed

Material data - housing
Insulating material group I
CTI according to IEC 60112 600
Housing color green (6021)
Insulating material PA
Flammability rating according to UL 94 V0
Material data - contact
Contact material Cu alloy
Surface characteristics Completely gold-plated


Thermal test | Test group C
Tested number of positions 5
Specification IEC 60512-5-1:2002-02
Electrical properties
Rated surge voltage (III/2) 2.5 kV
Pollution degree 2
Contact resistance 4.4 mΩ
Rated voltage (III/2) 125 V
Air clearances and creepage distances |
Rated insulation voltage (II/2) 320 V
Rated surge voltage (III/3) 2.5 kV
Rated surge voltage (III/2) 2.5 kV
minimum clearance value - non-homogenous field (II/2) 1.5 mm
minimum creepage distance (III/3) 1.9 mm
minimum clearance value - non-homogenous field (III/3) 1.5 mm
Insulating material group I
minimum clearance value - non-homogenous field (III/2) 1.5 mm
minimum creepage distance (III/2) 0.75 mm
minimum creepage distance (II/2) 1.6 mm
Rated surge voltage (II/2) 2.5 kV
Rated insulation voltage (III/2) 125 V
Specification IEC 60664-1:2007-04

Outer packaging type Carton
Type of packaging packed in cardboard

Maximum load current 8 A

Platform

Number of positions 5


Cod comandă 2709561
Unitate de ambalare 10 pc
Cantitate minimă pentru comandă 1 pc
Pagina de catalog Pagina 234 (C-4-2017)
GTIN 4017918892654
Greutate pe bucată (inclusiv ambalajul) 5,6 GRM
Greutate pe bucată (fără ambalaj) 5,1 GRM
Cod tarifar vamal 85366990
Țara de origine DE



UL Recognized

Approval Specification Data
Nominal voltage UN 150 V
Nominal current IN 8 A

cUL Recognized

Approval Specification Data
Nominal voltage UN 150 V
Nominal current IN 6 A

EAC

cULus Recognized


Avantajele dumneavoastră

Space-saving installation under the housing in the DIN rail
Contact design enables electronics modules to be easily snapped on
Power supply and communication without additional wiring
Parallel and serial contacts for efficient signal and data transmission