Protective cap - PV-C PROTECTION CAP
1785430

Photovoltaic connector, Range of articles: Sunclix, Protective cap, color: black. self-sealing, without interlock, set consisting of: 1 protective cap for connector side and 1 protective cap for coupling side


Detalhes dos produtos




General self-sealing, without interlock, set consisting of: 1 protective cap for connector side and 1 protective cap for coupling side
Safety note
Safety note • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.

Product type Photovoltaic connector
Pitch 0 mm

Width 19 mm
Height 23.3 mm
Length 59 mm
Pitch 0 mm

Color black
Insulating material TPE

Ambient conditions
Degree of protection IP65/IP67 (see also the description in the connector installation manuals)
Ambient temperature (operation) -40 °C ... 85 °C

N.º de artigo 1785430
Pcs./Emb 100 Unidade
Quantidade mínima de pedido 100 Unidade
Chave comercial ABL
Chave de produto ABLBZC
Página de catálogo Página 420 (C-2-2013)
GTIN 4046356569613
Peso por unidade (inclusive embalagem) 4,078 g
Peso por unidade (excluindo embalagem) 4,042 g
Número do imposto alfandegário 39269097
País de origem DE


ECLASS

ECLASS-9.0 27440208
ECLASS-10.0.1 27440208
ECLASS-11.0 27440208

ETIM

ETIM 8.0 EC002314

UNSPSC

UNSPSC 21.0 39121400

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values