Retainer for Vehicle Connector as parking position at charging stations for E-Mobility (EVSE)
CHARX connect, Charging connector holder, for vehicle charging connectors on charging stations (EVSE), Type 1, SAE J1772, Front mounting
Retainer for Vehicle Connector as parking position at charging stations for E-Mobility (EVSE)
| Product type | Charging connector holder |
| Application | for vehicle charging connectors on charging stations (EVSE) |
| Charging standard | Type 1 |
| Charging mode | Mode 3 |
| Type of charging current | AC |
| Desenho cotado |
|
| Width | 75 mm |
| Height | 75 mm |
| Depth | 37.5 mm |
| Bore dimensions | 60 mm x 60 mm |
| Color Housing | black |
| Flammability rating according to UL 94 | V0 |
| Material | Plastic |
| Securing | With actuation lever |
| Removal | Lever actuation and removal |
| Ambient conditions | |
| Degree of protection (when plugged in) | IP54 |
| Degree of protection | IP54 |
| Ambient temperature (operation) | -30 °C ... 50 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Standards | |
| Standards/regulations | SAE J1772 |
| Mounting type Front mounting 0 to 45 degree frontal inclination possible | Front mounting 0 to 45 degree frontal inclination possible |
| Possible mounting positions | Front mounting |
| Restrictions to mounting position | Only 0 to 45 degree frontal inclination possible, see figure |
| Mounting hole diameter | 6.00 mm (ø) |