AC charging cable - EV-T1M3C-1AC32A-10M6,0ESBK00

Detalhes dos produtos

AC charging cable with Vehicle Connector and open cable end for charging electric vehicles (EV) with alternating current (AC) via type 1 Vehicle Inlets, for installation at charging stations for E-Mobility (EVSE)

General NOTE: Signal transmission is dependent on the cable length and may be adversely affected.
General The cable capacity must therefore be assessed in the overall system of the charging station and must not exceed 3100 pF (IEC 61851-1, Annex A, Table A.2, Note d).
General Interference-free V2G communication in accordance with ISO 15118 is not guaranteed for cable lengths over 10 m (ISO IEC 15118-3, A.11.3, Table A.11).
General Cable management is required in certain regions if the cable length exceeds 5.0 m (Switzerland) or 7.5 m (USA) (IEC 61851-1).

Application AC charging cable with Vehicle Connector, open cable end, with protective cap
Type Design line 1
Product definition
Charging mode Mode 3, Case C
Charging standard Type 1

Number of phases 1
Type of signal transmission Pulse width modulation
Type of charging current AC single-phase
Note on the connection method Crimp connection, cannot be disconnected
Coding 480 Ω (Lever actuated)
150 Ω (Lever not actuated)
Maximum capacity 8 kW
Power contact
Number 3 (L1, N, PE)
Rated voltage 250 V AC
Rated current 32 A
Signal contact
Number 2 (CP, CS)
Rated voltage 30 V AC
Rated current 2 A

Vehicle charging connector
Width 55.20 mm
Height 72.60 mm
Depth 235.90 mm

Housing material Plastic
Material of grip body Soft plastic
Material protective cap Soft plastic
Actuating lever material Metal
Material mating face Plastic
Material surface of contacts Ag
Color Housing black
Color Connection profile gray
Color Handle area gray
Color Actuation element gray
Color Protective cap black

Fixed cable length 10 m
Wiring standards/regulations prEN 50620 / DIN EN 50620
Wiring certifications VDE
Cable weight max. 305 kg/km
Cable structure
Cable type Class 5
Type of cable straight
Cable structure 3 x 6.0 mm² + 1 x 0.5 mm²
Outer sheath, material TPE-U
External sheath, color black
External cable diameter 12.8 mm ±0.4 mm
Electrical properties
Conductor resistance ≤ 0.0033 Ω/m (based on a power core, at an ambient temperature of 20°C)
Mechanical properties
Smallest bending radius, fixed installation 96 mm (7.5 x diameter)

Label 14.1 mm x 44.8 mm (customer logo on request)
Mechanical data
Insertion force < 75 N
Withdrawal force < 75 N
Design D-Line
Locking type No locking option for U-lock

Ambient conditions
Ambient temperature (operation) -30 °C ... 50 °C
Ambient temperature (storage/transport) -40 °C ... 80 °C
Altitude 5000 m (above sea level)

Standards/regulations IEC 62196-2
SAE J1772

N.º de artigo 1623597
Pcs./Emb 1 Unidade
Quantidade mínima de pedido 1 Unidade
Observação Produção ligada a pedido (sem devolução)
Chave comercial XWB
Chave de produto XWBAAA
GTIN 4055626172026
Peso por unidade (inclusive embalagem) 3 618 g
Peso por unidade (excluindo embalagem) 3,53 g
Número do imposto alfandegário 85444290
País de origem DE


ETIM 6.0 EC002897


UNSPSC 19.0 39121522

China RoHS Environmentally Friendly Use Period = 10;
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Produtos compatíveis


Consistent design of all Phoenix Contact Vehicle Connectors and Infrastructure Plugs
Silver-plated surface of the power and signal contacts
Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001
Convenient handling, thanks to the ergonomic handle and additional, rubber grip components