- Home
-
Products
-
PCB terminal blocks and PCB connectors
-
PCB connectors
-
Product list PCB connectors
- Feed-through header - MSTBO 2,5/ 4-G1R THR BK - 2709752
Feed-through header - MSTBO 2,5/ 4-G1R THR BK - 2709752
PCB header, nominal cross section: 2.5 mm², color: black, nominal current: 16 A, rated voltage (III/2): 320 V, type of contact: Male connector, Number of rows: 1, Number of positions per row: 4, pitch: 5 mm, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2.5 mm, Locking: without, type of packaging: 44 mm wide tape, Product with pin output on right side
Price:
Item properties
| Brief article description | Feed-through header |
|---|---|
| Type of contact | Male connector |
| Range of articles | MSTBO 2,5/ -G1R-THR |
| Pitch | 5 mm |
| Number of positions | 4 |
| Mounting type | THR soldering |
| Pin layout | Linear pinning |
| Locking | without |
| Number of levels | 1 |
Electrical parameters
| Nominal current IN | 16 A |
|---|---|
| Rated voltage (III/3) | 250 V |
| Rated voltage (III/2) | 320 V |
| Rated voltage (II/2) | 630 V |
| Rated surge voltage (III/3) | 4 kV |
| Rated surge voltage (III/2) | 4 kV |
| Rated surge voltage (II/2) | 4 kV |
Material data - housing
| Housing color | black (9005) |
|---|---|
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
Dimensions for the product
| Dimensional drawing |
|
|---|---|
| Caption | Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center |
| Length [ l ] | 15.35 mm |
| Width [ w ] | 19.95 mm |
| Height [ h ] | 16.5 mm |
| Pitch | 5 mm |
| Solder pin [P] | 2.5 mm |
| Pin spacing | 5.00 mm |
| Pin dimensions | 1 x 1 mm |
Packaging information
| Type of packaging | 44 mm wide tape |
|---|---|
| Pieces per package | 100 |
| Denomination packing units | Pcs. |
| [W] tape width | 44 mm |
| Outer packaging type | Transparent-Bag |
Ambient conditions
| Ambient temperature (storage/transport) | -40 °C ... 55 °C |
|---|---|
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 105 °C (dependent on the derating curve) |
| Relative humidity (storage/transport) | 80 % |
Air clearances and creepage distances
| Clearances and creepage distances | IEC 60664-1:1992-10 + A1:2000-02 + A2:2002-05 |
|---|---|
| Specification | IEC 60664-1:1992-10 + A1:2000-02 + A2:2002-05 |
| Minimum clearance - inhomogeneous field (III/3) | 3 mm |
| Minimum clearance - inhomogeneous field (III/2) | 3 mm |
| Minimum clearance - inhomogeneous field (II/2) | 3 mm |
| Minimum creepage distance value (III/3) | 3.2 mm |
| Minimum creepage distance value (III/2) | 1.6 mm |
| Minimum creepage distance value (II/2) | 3.2 mm |
Mechanical test group (A)
| Test specification | IEC 61984 |
|---|---|
| Visual inspection | IEC 60512-1-1:2002-02 |
| Dimension check | IEC 60512-1-2:2002-02 |
| Resistance of inscriptions | IEC 60068-2-70:1995-12 |
| Insertion and withdrawal force | IEC 60512-13-2:2006-02 |
| No. of cycles | 25 |
| Insertion strength per pos. approx. | 7 N |
| Withdraw strength per pos. approx. | 6 N |
| Polarization and coding | IEC 60512-13-5:2006-02 |
| Contact holder in insert | IEC 60512-15-1:2008-05 |
| Test force per pos. | 45 N |
Life cycle test group (B)
| Specification | IEC 60512-5:1992-08 |
|---|---|
| Contact resistance R1 | 1.57 mΩ |
| Insertion/withdrawal cycles | 25 |
| Contact resistance R2 | 1.65 mΩ |
| Impulse withstand voltage at sea level | 4.8 kV |
Thermal tests (C)
| Specification | IEC 60512-5-1:2002-02 |
|---|---|
| Number of positions | 4 |
| Upper limiting temperature requirements <100 °C | Test passed |
Climatic test group (D)
| Specification | ISO 6988:1985-02 |
|---|---|
| Cold stress | -40 °C/2 h |
| Thermal stress | 100 °C/168 h |
| Corrosive stress | KFW 0.2 S/1 cycle |
| Impulse withstand voltage at sea level | 4.8 kV |
| Power-frequency withstand voltage | 2.25 kV |
Degree of protection test group (E)
| Specification | IEC 61984:2008-10 |
|---|---|
| Result, degree of protection, IP code | Finger safety with IP20 test finger |
Vibration test
| Specification | IEC 60068-2-6:1995-03 |
|---|---|
| Frequency | 10 - 150 - 10 Hz |
| Sweep speed | 1 octave/min |
| Amplitude | 0.35 mm (10 - 60.1 Hz) |
| Acceleration | 5 g (60.1 - 150 Hz) |
| Test duration per axis | 2.5 h |
| Test directions | X-, Y- and Z-axis |
Standards and Regulations
| Connection in acc. with standard | EN-VDE |
|---|---|
| Flammability rating according to UL 94 | V0 |
Environmental Product Compliance
| China RoHS | Environmentally friendly use period: unlimited = EFUP-e |
|---|---|
| No hazardous substances above threshold values |
Classifications
eCl@ss
| eCl@ss 10.0.1 | 27440402 |
|---|---|
| eCl@ss 11.0 | 27460201 |
| eCl@ss 4.0 | 27260700 |
| eCl@ss 4.1 | 27260700 |
| eCl@ss 5.0 | 27260700 |
| eCl@ss 5.1 | 27260700 |
| eCl@ss 6.0 | 27260700 |
| eCl@ss 7.0 | 27440402 |
| eCl@ss 8.0 | 27440402 |
| eCl@ss 9.0 | 27440402 |
ETIM
| ETIM 2.0 | EC001031 |
|---|---|
| ETIM 3.0 | EC001031 |
| ETIM 4.0 | EC002637 |
| ETIM 5.0 | EC002637 |
| ETIM 6.0 | EC002637 |
| ETIM 7.0 | EC002637 |
UNSPSC
| UNSPSC 6.01 | 30211801 |
|---|---|
| UNSPSC 7.0901 | 39121432 |
| UNSPSC 11 | 34131203 |
| UNSPSC 12.01 | 39121432 |
| UNSPSC 13.2 | 39121409 |
| UNSPSC 18.0 | 39121409 |
| UNSPSC 19.0 | 39121409 |
| UNSPSC 20.0 | 39121409 |
| UNSPSC 21.0 | 39121409 |
PHOENIX CONTACT (Pty) Ltd.
36 Lyn Road
P.O. Box 916
ZA-Ferndale 2160
P.O. Box 916
ZA-Ferndale 2160
+27/11/801-8200
"$pageName" on