- Home
-
Products
-
Industrial communication technology
-
Fieldbus communication
-
Converters and isolators
-
Media converters
-
Product list Serial media converters
- FO converters - PSI-MOS-RS485W2/FO 660 E - 2708313
Product Description
The PSI-MOS-RS485W2/FO... FO converters convert the electrical data signal into an optical one by protocol transparent means.
The integrated optical diagnostics allow permanent monitoring of the FO paths during installation and also during operation. The floating switch contact is activated when the signal output on the fiber optic paths drops to a critical level.
The PSI-MOS-RS485W2/FO... E termination devices convert an RS-485 interface to a fiber optic cable. They are ideal for point-to-point connections.
Your advantages
- Can be combined with the PSI copper repeater in a modular way using DIN rail connectors
- Supply voltage and data signals routed through via DIN rail connectors
- Connections can be plugged in using a COMBICON screw terminal block
- Automatic data rate detection or fixed data rate setting via DIP switches
- High-quality electrical isolation between all interfaces (RS-485 // fiber optic ports // power supply // DIN rail connector)
- Redundant power supply possible by means of optional system power supply unit
- Approved for use in zone 2
- Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1
- Integrated optical diagnostics for continuous monitoring of fiber optic paths
- Floating switch contact for leading alarm generation in relation to critical fiber optic paths
- Suitable for data rates up to 500 kbps
- Shipbuilding approval in accordance with DNV GL
PHOENIX CONTACT (Pty) Ltd.
36 Lyn Road
P.O. Box 916
ZA-Ferndale 2160
P.O. Box 916
ZA-Ferndale 2160
+27/11/801-8200
"$pageName" on