FO converters - PSI-MOS-DNET CAN/FO 850/EM - 2708096

FO converter with integrated optical diagnostics, for DeviceNet™, CAN, CANopen® up to 800 kbps, extension/redundancy module, interfaces: 1 x FO (BFOC), 850 nm, for PCF/fiberglass cable (multimode)



Technical data



Product Description

The PSI-MOS-DNET... fiber optic transmission system enables DeviceNet™ and CANopen® users to benefit from simple and interference-free networking based on fiber optics. In addition, bus cable short circuits only affect the specific potential segment concerned. This increases overall availability, and improves flexibility when designing the bus topology. The use of fiber optic technology enables branch lines and star and tree structures to be created.
The 22.5 mm space-saving devices from the PSI-MOS-DNET CAN/FO... series feature an internal backplane. The maximum network expansion that can be achieved (sum total of copper and fiber optic cables) essentially depends on the data rate used.

Your advantages

  • Data rates of up to 800 kbps, set via DIP switches
  • Approved for use in zone 2
  • Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1
  • Integrated optical diagnostics for continuous monitoring of fiber optic paths
  • High-quality electrical isolation between all interfaces (DeviceNet // fiber optic port // power supply // backplane)
  • Integrated bus termination resistor can be connected internally
  • Integrated backplane for routing through the supply voltage and data signals
  • Connections can be plugged in using a COMBICON screw terminal block
  • Floating switch contact in the basic module for leading alarm generation in relation to critical fiber optic paths

Key Commercial Data

Orderkey 2708096
Packing unit 1 pc
Catalog page Page 433 (C-6-2019)
GTIN 4017918943219
Weight per Piece (excluding packing) 0.000 g
Custom tariff number 85176200
Country of origin DE (Germany)


36 Lyn Road
P.O. Box 916
ZA-Ferndale 2160

  • Create PDF
  • Recommend
  • Feedback