PCB terminal block - MKDSO 2,5/ 3-R RD - 2707039

PCB terminal block, nominal current: 24 A, rated voltage (III/2): 400 V, nominal cross section: 2.5 mm², Number of rows: 1, Number of positions per row: 3, product range: MKDSO 2,5/..-R, pitch: 5 mm, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: red, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm. Product with pin output on right side

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Diagram  

Diagram
Type: MKDSO 2,5/4...L(R)
Test based on DIN EN 60512-5-2:2003-01
Reduction factor = 1
Number of positions: 4

Back to top

Item properties

Brief article description PCB terminal block
Range of articles MKDSO 2,5/..-R
Pitch 5 mm
Number of positions 3
Screw thread M3
Mounting type Wave soldering
Pin layout Linear pinning
Number of levels 1
Back to top

Electrical parameters

Nominal current IN 24 A
Nom. voltage 400 V
Rated voltage (III/3) 250 V
Rated voltage (III/2) 400 V
Rated voltage (II/2) 630 V
Rated surge voltage (III/3) 4 kV
Rated surge voltage (III/2) 4 kV
Rated surge voltage (II/2) 4 kV
Back to top

Connection capacity

Connection method Screw connection with tension sleeve
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
Conductor cross section AWG / kcmil 26 ... 14
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 2.5 mm²
2 conductors with same cross section, solid 0.14 mm² ... 0.75 mm²
2 conductors with same cross section, flexible 0.14 mm² ... 0.75 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm² ... 0.75 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 1.5 mm²
Stripping length 8 mm
Torque 0.5 Nm ... 0.6 Nm
Back to top

Material data - contact

Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material Cu alloy
Surface characteristics Tin-plated
Metal surface terminal point (top layer) Tin (5 - 7 µm Sn)
Metal surface terminal point (middle layer) Nickel (2 - 3 µm Ni)
Metal surface soldering area (top layer) Tin (5 - 7 µm Sn)
Metal surface soldering area (middle layer) Nickel (2 - 3 µm Ni)
Back to top

Material data - housing

Housing color red
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Back to top

Dimensions for the product

Dimensional drawing
Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center
Length [ l ] 15.3 mm
Width [ w ] 15.98 mm
Height [ h ] 18.05 mm
Pitch 5 mm
Solder pin [P] 3.5 mm
Pin dimensions 0.8 x 1 mm
Back to top

Dimensions for PCB design

Hole diameter 1.4 mm
PCB thickness 1.4 mm ... 1.8 mm
Back to top

Packaging information

Pieces per package 50
Denomination packing units Pcs.
Back to top

Ambient conditions

Ambient temperature (storage/transport) -40 °C ... 55 °C
Ambient temperature (assembly) -5 °C ... 100 °C
Ambient temperature (operation) -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve)
Relative humidity (storage/transport) 80 %
Back to top

Connection and connection method

Test for conductor damage and slackening IEC 60998-2-1:1990-04
Back to top

Pull-out test

Pull-out test IEC 60998-2-1:1990-04
Conductor cross section / conductor type / tensile force 0.14 mm² / solid / > 10 N
0.14 mm² / flexible / > 10 N
2.5 mm² / solid / > 50 N
2.5 mm² / flexible / > 50 N
Back to top

Air clearances and creepage distances

Clearances and creepage distances IEC 60664-1:2007-04
Specification IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3) 3 mm
Minimum clearance - inhomogeneous field (III/2) 3 mm
Minimum clearance - inhomogeneous field (II/2) 3 mm
Minimum creepage distance value (III/3) 3.2 mm
Minimum creepage distance value (III/2) 2 mm
Minimum creepage distance value (II/2) 3.2 mm
Back to top

Temperature-rise test

Specification IEC 60998-2-1:1990-04
Requirement temperature-rise test Increase in temperature ≤ 45 K
Back to top

Current carrying capacity / derating curves

Diagram
Caption Type: MKDSO 2,5/4...L(R)
Test based on DIN EN 60512-5-2:2003-01
Reduction factor = 1
Number of positions: 4
Back to top

Insulation resistance

Specification IEC 60998-2-1:1990-04
Result Test passed
Insulation resistance, neighboring positions 109 Ω
Back to top

Thermal stability (test finger safety)

Result Test passed
Specification IEC 60998-2-1:1990-04
Back to top

Mechanical strength/tumbling barrel

Specification IEC 60998-2-1:1990-04
Number of drop cycles 50
Back to top

Vibration test

Specification IEC 60068-2-6:1995-03
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Amplitude 0.35 mm (10 - 60.1 Hz)
Acceleration 5 g (60.1 - 150 Hz)
Test duration per axis 2.5 h
Test directions X-, Y- and Z-axis
Back to top

Thermal stability (ball thrust test)

Specification IEC 60998-2-1:1990-04
Test duration 1 h
Back to top

Test for assessing the risk of fire (glow wire)

Specification IEC 60998-2-1:1990-04
Temperature 850 °C
Time of exposure 5 s
Back to top

Standards and Regulations

Connection in acc. with standard EN-VDE
CSA
Flammability rating according to UL 94 V0
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 10.0.1 27440401
eCl@ss 11.0 27460101
eCl@ss 4.0 27180400
eCl@ss 4.1 27180400
eCl@ss 5.0 27180500
eCl@ss 5.1 27261100
eCl@ss 6.0 27261100
eCl@ss 7.0 27440401
eCl@ss 8.0 27440401
eCl@ss 9.0 27440401
Back to top

ETIM

ETIM 2.0 EC001031
ETIM 3.0 EC001031
ETIM 4.0 EC002643
ETIM 5.0 EC002643
ETIM 6.0 EC002643
ETIM 7.0 EC002643
Back to top

UNSPSC

UNSPSC 6.01 31261501
UNSPSC 7.0901 31261501
UNSPSC 11 31261501
UNSPSC 12.01 31261501
UNSPSC 13.2 39121432
UNSPSC 18.0 39121432
UNSPSC 19.0 39121432
UNSPSC 20.0 39121432
UNSPSC 21.0 39121432
Back to top

PHOENIX CONTACT (Pty) Ltd.

36 Lyn Road
P.O. Box 916
ZA-Ferndale 2160
+27/11/801-8200

Service

HIGHLIGHTS 2020

Creative solutions for a smart world

  • Create PDF
  • Recommend
  • Feedback