PV-SET 4ST/600DC/32A
-
Surge protection device set
2800599
Surge protection in IP65 housing for the DC side of an inverter for four-string photovoltaic systems up to 600 V DC.
Product details
| IEC test classification | II |
| EN type | T2 |
| Type | Installation housing |
| Surge protection fault message | Optical, remote indicator contact |
| Insulation characteristics | |
| Protection class | II |
| Overvoltage category | III |
| Pollution degree | 2 |
| Dimensional drawing |
|
| Width | 200 mm |
| Height | 200 mm |
| Depth | 122 mm |
| Flammability rating according to UL 94 | HB |
| Housing material | Polystyrene |
| Maximum continuous voltage UC | 600 V DC |
| Rated load current IL | ≤ 32 A DC |
| Standby power consumption PC | ≤ 12 mW |
| Nominal discharge current In (8/20) µs | 20 kA |
| Maximum discharge current Imax (8/20) µs | 40 kA |
| Voltage protection level Up | ≤ 1.8 kV (at In) |
| Response time tA | ≤ 25 ns |
| Protective circuit DC voltage side (DC) | |
| Short-circuit current ISCSTC | 24 A DC |
| Open circuit voltage UOCSTC | 500 V DC |
| Maximum discharge current Imax (8/20) µs | 40 kA |
| Response time tA | ≤ 25 ns |
| Nominal discharge current In (8/20) µs | 20 kA |
| Rated load current IL | ≤ 32 A DC |
| Maximum continuous operating voltage UCPV | 500 V DC |
| Voltage protection level Up | ≤ 1.8 kV (at In) |
| Standby power consumption PC | ≤ 12 mW |
| Ambient conditions | |
| Degree of protection | IP65 |
| Ambient conditions | A, B (in accordance with EN 60439-1 7.10) |
| Ambient temperature (operation) | -25 °C ... 40 °C |
| Altitude | max. 2000 m |
| Standards/specifications | IEC 61643-1 |
| Note | 2005 |
| Standards/specifications | DIN EN 61643-11 |
| Note | 2002 + A11 |
| Standards/specifications | IEC 60364-7-712 |
| Note | 2002 |
| Standards/specifications | EN 60439-1 |
| Mounting type | Surface/Panel mounting |
| Mounting position | any |