Feed-through header - MCO 1,5/ 5-G1L-3,5 KMGY - 2278380

PCB header, nominal cross section: 1.5 mm², color: light gray, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Male connector, Number of potentials: 5, Number of rows: 1, Number of positions per row: 5, number of connections: 5, product range: MCO 1,5/..-G1L, pitch: 3.5 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 2 mm, Locking: without, type of packaging: packed in cardboard, Product with pin output on left side



Technical data





Drilling diagram  

Drilling diagram


Derating curve for: MC 1,5/...-ST-3,5 with MCO 1,5/...-G1L(R)-3,5 KMGY

Back to top

Item properties

Brief article description Feed-through header
Type of contact Male connector
Range of articles MCO 1,5/..-G1L
Pitch 3.5 mm
Number of positions 5
Mounting type Wave soldering
Pin layout Linear pinning
Locking without
Number of levels 1
Number of connections 5
Number of potentials 5
Back to top

Electrical parameters

Nominal current IN 8 A
Nom. voltage 160 V
Rated voltage (III/3) 160 V
Rated voltage (III/2) 160 V
Rated voltage (II/2) 320 V
Rated surge voltage (III/3) 2.5 kV
Rated surge voltage (III/2) 2.5 kV
Rated surge voltage (II/2) 2.5 kV
Back to top

Material data - contact

Contact material Cu alloy
Surface characteristics tin-plated
Back to top

Material data - housing

Housing color light gray (7035)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Back to top

Dimensions for the product

Dimensional drawing
Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center
Length [ l ] 14.55 mm
Width [ w ] 19.95 mm
Height [ h ] 17.8 mm
Pitch 3.5 mm
Solder pin [P] 2 mm
Pin dimensions 0.8 x 0.8 mm
Back to top

Dimensions for PCB design

Hole diameter 1.2 mm
Back to top

Packaging information

Type of packaging packed in cardboard
Pieces per package 50
Denomination packing units Pcs.
Outer packaging type Carton
Back to top

Ambient conditions

Ambient temperature (storage/transport) -40 °C ... 55 °C
Ambient temperature (assembly) -5 °C ... 100 °C
Ambient temperature (operation) -40 °C ... 105 °C (dependent on the derating curve)
Relative humidity (storage/transport) 80 %
Back to top

Air clearances and creepage distances

Clearances and creepage distances
Minimum clearance - inhomogeneous field (III/3) 1.5 mm
Minimum clearance - inhomogeneous field (III/2) 1.5 mm
Minimum clearance - inhomogeneous field (II/2) 1.5 mm
Minimum creepage distance value (III/3) 2 mm
Minimum creepage distance value (III/2) 0.8 mm
Minimum creepage distance value (II/2) 1.6 mm
Back to top

Current carrying capacity / derating curves

Caption Type: MC 1,5/...-ST-3,5 with MCO 1,5/...-G1L(R)-3,5 KMGY
Back to top

Mechanical test group (A)

Test specification IEC 61984
Visual inspection IEC 60512-1-1:2002-02
Dimension check IEC 60512-1-2:2002-02
Resistance of inscriptions IEC 60068-2-70:1995-12
Insertion and withdrawal force IEC 60512-13-2:2006-02
No. of cycles 25
Insertion strength per pos. approx. 8 N
Withdraw strength per pos. approx. 4 N
Polarization and coding IEC 60512-13-5:2006-02
Contact holder in insert IEC 60512-15-1:2008-05
Test force per pos. 23 N
Back to top

Life cycle test group (B)

Specification IEC 60512-9-1:2010-03
Contact resistance R1 1.6 mΩ
Insertion/withdrawal cycles 25
Contact resistance R2 1.6 mΩ
Impulse withstand voltage at sea level 2.95 kV
Back to top

Thermal tests (C)

Specification IEC 60512-5-1:2002-02
Number of positions 5
Upper limiting temperature requirements <100 °C Test passed
Back to top

Climatic test group (D)

Specification ISO 6988:1985-02
Cold stress -40 °C/2 h
Thermal stress 105 °C/168 h
Corrosive stress 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle
Impulse withstand voltage at sea level 2.95 kV
Power-frequency withstand voltage 1.39 kV
Back to top

Degree of protection test group (E)

Specification IEC 61984:2008-10
Result, degree of protection, IP code No contact safety (IP00) in acc. with IEC 60529:1989-11 + AMD 1:1999-11 + AMD 2:2013-08
Back to top

Vibration test

Specification IEC 60068-2-6:2007-12
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Amplitude 0.35 mm (10 - 60.1 Hz)
Acceleration 5 g (60.1 - 150 Hz)
Test duration per axis 2.5 h
Test directions X-, Y- and Z-axis
Back to top

Standards and Regulations

Connection in acc. with standard CUL
Flammability rating according to UL 94 V0
Back to top

Environmental Product Compliance

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Back to top



eCl@ss 10.0.1 27440402
eCl@ss 11.0 27460201
eCl@ss 4.0 27260700
eCl@ss 4.1 27260700
eCl@ss 5.0 27260700
eCl@ss 5.1 27260700
eCl@ss 6.0 27260700
eCl@ss 7.0 27440402
eCl@ss 9.0 27440402
Back to top


ETIM 2.0 EC001031
ETIM 3.0 EC001031
ETIM 4.0 EC002637
ETIM 5.0 EC002637
ETIM 6.0 EC002637
ETIM 7.0 EC002637
Back to top


UNSPSC 6.01 31261501
UNSPSC 7.0901 31261501
UNSPSC 11 31261501
UNSPSC 12.01 31261501
UNSPSC 13.2 39121409
UNSPSC 18.0 39121409
UNSPSC 19.0 39121409
UNSPSC 20.0 39121409
UNSPSC 21.0 39121409
Back to top


36 Lyn Road
P.O. Box 916
ZA-Ferndale 2160



Creative solutions for a smart world

  • Create PDF
  • Recommend
  • Feedback