Type 1 surge protection plug - FLT-SEC-H-T1-440/25-P - 2907261

Replacement plug for lightning current arresters from the FLASHTRAB SEC HYBRID 440 product range, for L-N and L-PEN paths.

Price:

Overview

Technical data

Accessories

Approvals

Downloads

Drawings



Dimensional drawing  

Dimensional drawing

Circuit diagram  

Circuit diagram



Back to top

Dimensions

Height 113.4 mm
Width 35.5 mm
Depth 64.2 mm
Horizontal pitch 2 Div.
Back to top

Ambient conditions

Degree of protection IP20
Ambient temperature (operation) -40 °C ... 80 °C
Ambient temperature (storage/transport) -40 °C ... 80 °C
Altitude ≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation) 5 % ... 95 %
Back to top

General

IEC test classification I / II
T1 / T2
EN type T1 / T2
IEC power supply system TN-C
Mode of protection L-N
L-PE
L-PEN
N-PE (4+0)
Mounting type on base element
Color light grey RAL 7035
Housing material PA 6.6-FR 20 % GF
PBT-FR
Degree of pollution 2
Flammability rating according to UL 94 V-0
Type Male
Number of positions 1
Surge protection fault message optical
Back to top

Protective circuit

Nominal voltage UN 400 V AC (TN)
400 V AC (IT)
Nominal frequency fN 50 Hz (60 Hz)
Maximum continuous voltage UC 440 V AC
Residual current IPE ≤ 5 µA
Nominal discharge current In (8/20) µs 25 kA
Maximum discharge current Imax (8/20) µs 50 kA
Impulse discharge current (10/350) µs, charge 12.5 As
Impulse discharge current (10/350) µs, specific energy 160 kJ/Ω
Impulse discharge current (10/350) µs, peak value limp 25 kA
Follow current interrupt rating Ifi 50 kA
Short-circuit current rating ISCCR 50 kA
Voltage protection level Up ≤ 2.5 kV
Residual voltage Ures ≤ 2.1 kV (at In)
≤ 2.8 kV (at 50 kA)
≤ 1.7 kV (at 12.5 kA)
≤ 1.5 kV (at 5 kA)
≤ 1.35 kV (at 2.5 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs ≤ 2.5 kV
TOV behavior at UT 580 V AC (5 s / withstand mode)
760 V AC (120 min / withstand mode)
1640 V AC (200 ms / safe failure mode)
Response time tA ≤ 100 ns
Back to top

Connection data

Connection method pluggable
Back to top

Standards and Regulations

Standards/regulations IEC 61643-11 2011
EN 61643-11 2012
Back to top

Environmental Product Compliance

REACh SVHC N,N-dimethylacetamide 127-19-5
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 10.0.1 27130890
eCl@ss 11.0 27130890
eCl@ss 4.0 27130800
eCl@ss 4.1 27130800
eCl@ss 5.0 27130800
eCl@ss 5.1 27130800
eCl@ss 6.0 27130800
eCl@ss 7.0 27130802
eCl@ss 9.0 27130890
Back to top

ETIM

ETIM 4.0 EC000381
ETIM 5.0 EC002496
ETIM 6.0 EC000381
ETIM 7.0 EC000381
Back to top

UNSPSC

UNSPSC 13.2 39121620
UNSPSC 18.0 39121620
UNSPSC 19.0 39121620
UNSPSC 20.0 39121620
UNSPSC 21.0 39121620
Back to top

PHOENIX CONTACT

586 Fulling Mill Road
Middletown, PA 17057
(800) 888-7388

  • Create PDF
  • Send by Email
  • Feedback