Industrial Ethernet Switch - FL SWITCH 4808E-16FX SM ST-4GC - 2891086

Rack-mount managed Ethernet switch meets IEC 61850-3 and IEEE 1613. Provides eight RJ45 ports at 10/100 Mbps, 16 ST SM fiber ports at 100 Mbps and four gigabit combo ports (10/100/1000 Mbps RJ45 connection; 1000 Mbps fiber optic connection requires 1000 Mbps SFP module).



Technical data




Width 442 mm
Height 44 mm
Depth 375 mm
Back to top

Ambient conditions

Degree of protection IP20
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Air pressure (operation) 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Air pressure (storage/transport) 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Back to top


Interface Ethernet (RJ45)
No. of ports 8 (RJ45 ports)
Note on the connection method Auto negotiation and autocrossing
Transmission physics Ethernet in RJ45 twisted pair
Transmission speed 10/100 Mbps
Transmission length 100 m
No. of ports 16 (Single mode)
Transmission physics Single-mode fiberglass
Transmission speed 100 Mbps (Full duplex)
Transmission length 40 km (typical)
Interface Ethernet (RJ45/FO combo)
No. of ports 4
Connection method Combo
Note on the connection method Auto negotiation and autocrossing (RJ45 interface)
Transmission physics Ethernet RJ45 (10/100/1000 Mbps) or SFP (1000 Mbps)
Transmission speed 10/100/1000 Mbps
Back to top


Basic functions Store and forward switch, Extended Ring and IEEE redundancy, Multicast control, IGMP snooping, trunking, Port and Tagging VLANs, Port and IEEE 802.1x security, SNMP V3 and Https security, SNTP, web customization, user accounts
Redundancy ERR (Extended ring redundancy)
Status and diagnostic indicators LEDs: US1, US2 (redundant voltage supply), link and activity per port
Back to top

Network expansion parameters

Cascading depth Network, linear, and star structure: any
Maximum conductor length (twisted pair) 100 m
Back to top

Supply voltage

Current consumption 476 mA (115 V AC from FL SWITCH 4800E-P5)
Inrush current 19.2 A (48 V DC from FL SWITCH 4800E-P1)
Back to top


Mounting type Rack mount, includes brackets
Type AX Block design
Net weight 4488 g
Back to top

Standards and Regulations

Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result 30g, 11 ms half-sine shock pulse
Type of test Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result 5g, 150 Hz, Criterion 3
Noise emission EN 61000-6-4
Noise immunity IEC 61850-3, IEEE 1613, EN 61000-6-2: 2005
Back to top

Environmental Product Compliance

China RoHS Environmentally Friendly Use Period = 10;
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top



eCl@ss 10.0.1 19170401
eCl@ss 4.0 27250501
eCl@ss 4.1 27250501
eCl@ss 5.0 19030117
eCl@ss 5.1 19030100
eCl@ss 6.0 19170100
eCl@ss 7.0 19170106
eCl@ss 8.0 19170106
eCl@ss 9.0 19170106
Back to top


ETIM 3.0 EC000734
ETIM 4.0 EC000734
ETIM 5.0 EC000734
ETIM 6.0 EC000734
ETIM 7.0 EC000734
Back to top


UNSPSC 6.01 43172901
UNSPSC 7.0901 43201404
UNSPSC 11 43172015
UNSPSC 12.01 43201410
UNSPSC 13.2 43222612
Back to top


586 Fulling Mill Road
Middletown, PA 17057
(800) 888-7388

  • Create PDF
  • Send by Email
  • Feedback