Industrial Ethernet Switch - FL SWITCH 3012E-2SFX - 2891067

Managed Ethernet switch meets IEC 61850-3 and IEEE 1613 standards. Provides 12 RJ45 ports at 10/100 Mbps and two SFP slots at 100 Mbps) with an operating temperature of -40°C ... +70°C.



Technical data





Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
Back to top


Width 78.6 mm
Height 145 mm
Depth 125 mm
Back to top

Ambient conditions

Degree of protection IP20
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Air pressure (operation) 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Air pressure (storage/transport) 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Back to top


Interface Ethernet (RJ45)
No. of ports 12 (RJ45 ports)
Note on the connection method Auto negotiation and autocrossing
Transmission physics Ethernet in RJ45 twisted pair
Transmission speed 10/100 Mbps
Transmission length 100 m
Interface Fiber optic interface
No. of ports 2 (SFP ports)
Transmission physics Depending on the SFP module
Transmission speed 100 Mbps (full duplex)
Transmission length up to 40 km (Depending on the fiber/SFP module used)
Back to top


Basic functions Store and forward switch, Extended Ring and IEEE redundancy, Multicast control, IGMP snooping, trunking, Port and Tagging VLANs, Port and IEEE 802.1x security, SNMP V3 and Https security, SNTP, web customization, user accounts
Redundancy ERR (Extended ring redundancy)
Status and diagnostic indicators LEDs: US1, US2 (redundant voltage supply), link and activity per port
Signal contact control voltage 250 V AC
Signal contact control current 1 A
Back to top

Network expansion parameters

Cascading depth Network, linear, and star structure: any
Maximum conductor length (twisted pair) 100 m
Back to top

Supply voltage

Supply voltage 24 V DC (redundant)
Residual ripple 3.6 VPP (within the permitted voltage range)
Supply voltage range 12 V DC ... 48 V DC
Typical current consumption 312 mA (at US = 24 V DC)
Back to top


Mounting type DIN rail
Type AX Block design
Net weight 1626.1 g
Housing material Aluminum
Back to top

Connection data

Connection method Pluggable COMBICON screw connections
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Stripping length 7 mm
Back to top

Standards and Regulations

Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result 30g, 11 ms half-sine shock pulse
Type of test Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result 5g, 150 Hz, Criterion 3
Type of test Free fall in acc. with IEC 60068-2-32
Test result 1 m
Noise emission EN 61000-6-4
Noise immunity IEC 61850-3, IEEE 1613, EN 61000-6-2: 2005
Conformance CE-compliant
Back to top

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 10;
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top



eCl@ss 10.0.1 19170401
eCl@ss 4.0 27250501
eCl@ss 4.1 27250501
eCl@ss 5.0 19030117
eCl@ss 5.1 19030100
eCl@ss 6.0 19170100
eCl@ss 7.0 19170106
eCl@ss 8.0 19170106
eCl@ss 9.0 19170106
Back to top


ETIM 3.0 EC000734
ETIM 4.0 EC000734
ETIM 5.0 EC000734
ETIM 6.0 EC000734
ETIM 7.0 EC000734
Back to top


UNSPSC 6.01 43172901
UNSPSC 7.0901 43201404
UNSPSC 11 43172015
UNSPSC 12.01 43201410
UNSPSC 13.2 43222612
Back to top


586 Fulling Mill Road
Middletown, PA 17057
(800) 888-7388

  • Create PDF
  • Send by Email
  • Feedback